This is my first time posting here. Iāve been following this thread now for awhile as I seem to have this problem. My problems arise from MSI B450 Pro Max boards with Ryzen processors. I have two of these combos.
Combo #1 runs solely AMD cards. It is stable.
Combo #2 ran solely Nvidia 3000 cards; 3090, 3080, 3070, 3060ti. It locked up constantly. So, I took a bunch of the cards and put them onto another board/CPU. That one was stable.
Rig #2 then got reconfigured maybe 10 days ago to 2x3060ti, 1080, 1070ti and then 3xRX 8b cards. It was stableā¦until last night. Now, it wonāt go more than five hours or so without locking up.
I got a ryzen 5 1600 x on a MSI B350 GAMING CARBON.
Always offline 2to5 hours.
I Test all, BIOS ,oc and hive settings
I Go to Windows all fine. Go Back to hive offlineā¦
So i Test Rave OS all fineā¦
This is a Photo of the Error after Crash
I donāt know if someone have talked about it, but I solved my problem just doing a simple overclock in my Ryzen 5 1600x. I set 4ghz clock and I reduced my Memory clock to 2800mzh. My rig never more frozen again (even with aggressive GPU overclocks)!
Iāve been having the same issue for over 2 weeks.
Iām on a ryzen 3 1200 and msi pro gaming max b450.
I have been switching risers, ocs, checking logs, reinstalling hive etc. with no good results.
Iām trying the cpu overclock solution right now. Does anyone know if there is a specific voltage that I should try for this CPU?
I have ran my rig without a single freeze for months. 2 days ago i swapped my processor from ryzen 7 3700x to r5 1600 and now im constantly freezin, just like described in this thread. Im inclined to believe itās processor/mb related. Trying those bios changes now. Couldāt do manual overclocks for some reason. Seems like multiplier is locked and couldāt even increase voltage. Just enable some auto oc profile for now.
r5 1600
asus rog strix b-450 gaming f II
8gb 2889 memory
ssd
four cards on risers
1500w power.
I think I figure this problem out. On usb or cheap ssd drives every time you update hiveos or make lots of changes to the rig settings something causes hiveos to get corrupted. Add 2 new cards to my rig 4 days ago and have been dealing with Hive just randomly freezing. Got so sick of dealing with it I decided to go with a fresh set up. This went great until I updated hiveos and thing started freezing again. It is crazy I could go 2 hour or 18 hours then it freezes. Loaded a fresh copy on my usb and it seems stable. If I make to many oc changes or update Hiveos things go to crap. Once I update to a higher quality ssd drive I havenāt had a problems. From everything I have test it comes down to hiveos updates or major rig changes on cheaper OS drives, mostly usb drives.
Not sure if you have solved this , I noticed you mentioned that you had no monitor connected, I had the exact same issue except i had a monitor connected, the rig would run fine until I turned the monitor off and then it would freeze, as long as the monitor was on, it would run fine.
at first I thought it was ram, I had cheap ram that i got off facebook market place, 1 of the sticks failed a memtest and i was running usb stick that had always been slow from day 1, bought 2x 8gb of ddr4 and replaced the usb with a samsung ssd, made a huge difference in boot time and updates and installing miners, was slow as all hell before, but sure enough when i got up in the morning it had frozen again, going by the time on the screen it was not long after i turned the screen off.
This issue happens for me as well. I have Asrock H110 Pro BTC+ and from time to time, I lose internet connection and rig freezes. The moment I unplug ethernet cable from the rig, I recover internet on my main PC, but I have to manually reboot the rig.
I have followed also this tutorial, but nothing:
LetĀ“s see how long it lasts now, this is just a pain in the a$$.
Same issue as a lot of you guys. Just total freeze ups happening sporadically with hard power reset the only cure.
Running gminer with 7x6800 XTs
Motherboard: Asus B450-F Gaming II
CPU: Ryzen 5 1600
Now. I have Two of these rigs. Identical cards, identical in all other ways in terms of the hardware. EXCEPT the memory, which is premium Corsair DIMM on the one that doesnāt freeze, and cheaper Vengeance LPX DIMM on the one that does. The memory is the ONLY difference between these two rigs. BIOS settings and version, overclocks on the cards, everything else is the same. Soā¦ seems to me at this point that swapping out the memory is the first thing I should try.
I also have an NVIDIA rig with the same base hardware, and that kept freezing up too, and it also had the Vengeance LPX memory, until I swapped out the memory DIMM, and since then it has been working flawlessly for weeks.
Iāve just swapped out the DIMM for the same type as is working in those other rigs and will post back here in a few days to let you know if that fixed it.
Hi again. It looks like I was able to fix the whatever issue I had. I just have now, from time to time, every few hours, miner reset, but thatĀ“s just a matter of seconds and it continues mining.
I originally had 10 GPUs (6 x Nvidia + 4 x AMD) and I splitted them in 2 rigs. 6 Nvidia one rig and 4 AMD the other rig, with another Vega56 I had there alone.
So far so good, no freezes, so I guess, somehow, H110 Pro Btc+ have issues managing so many GPUs or something like that, because having enough PSU power, 8 RAM, SSD, good overclocksā¦ thereĀ“s no way it was a bad configuration issue.
Soā¦ yeah, I guess I will just stick to 5-6 GPU rigs Max.
well I spoke to soon , it wasnāt the monitor after all , iām just about to try a different os, I really do like using hive os, my marriage is on the line here, I cbf listening to the mrs when this fails to be productive and she says " I told you so " I just canāt afford to have the 5 hour unnoticed outages, I havenāt been able to get a solid 24 hr run in 3 weeks
maybe itās the combination of amd and nvidia, might have to keep them separate , Wow this is the perfect excuse i can use to convince the mrs that i need to build a second rig asap ā¦ lol
There was a post on redit, apparently itās the am3 socket motherboards that suffer from this issue.
it just happens to be the board that iām using.
Another post suggested that it was the mem overclock settings that cause it, a few people who were having this issue set their mem clock to default and they reported back with 7 day uptime after that , no real right or wrong answer , what might fix someoneās problem might not work for others.