RTX3060(v1) best setting discussions

[BWideas]

Thanks for creating this thread. I went through the same thing as listed above. I switched back to miniz 1.8y4rc1 and now I’m back to 40.1 average MHs on all my RTX 3060v1 cards. With the latest version of miniz I was struggling to get more than 39.5.

My current config is following:
-Miner: miniz 1.8y4rc1
-Algo: ETH (DaggerHashimoto)
-OC: Core 1470, Mem 2600, PL 115w (GPUs are pulling 111w on average)
-Perf: 40.1MH/s
-Temps: 59 to 61 C
-Fans: Auto (49% to 55%)
-Driver:460.39
-Pool: HiveON

[BSAI]

Nice

Can you please share me MiniZ parameter as well?
As I mentioned on previous post, for some reason, my MiniZ detects 3 GPUS, while I only have 2 3060…
Only parameter I added is --mode=80

Thanks.

[BWideas]

I think you’re looking for the user config section:

–mode 80 --tune 37 --dag-fix

[BSAI]

Thank you!

[pablopsoto]

This is the performance for my 5 GPUs 3060 v1 with miniZ 1.8y4rc1 and the config used. Don’t mind the 3 RTX 3070, they are using lolminer.

[BSAI]

Hi Guys

Finally, I was able to use MiniZ with multiple 3060’s…

As I mentioned earlier, for some reason, even I only have 2 gpus MiniZ detected 3 gpus (I guess duplicate gpu for GPU0)

I struggled some time and found that if I explicitly configure mode option for each 3060, then it won’t detect duplicate GPU. It might be my env issue, but its something like this.
-cd 0 5
–mode0 80
–mode5 80
–tune=37
–dag-fix

Where modeX is GPU number.

I’ll try to run it and see its stable.

[BWideas]

Interesting find. Glad you got it working.

[BSAI]

Hi

I ended up with BWideas’s configuration and confirmed its very stable.

Avg hash rate of GPU5 is around 40.2MH/s and GPU0 is 39.9MH/s.
(Only reason why GPU0 is slightly less hash rate is since I’m connecting it with display)

Thank you.

[vlkoslak]

Nice!
did you notice a little variation of Watt consuming during mining? My 3060 oscillate between 106 and 113, i don’t know if its normal or if i should worry about.

" (Only reason why GPU0 is slightly less hash rate is since I’m connecting it with display)"

if you disconnect the monitor and reboot (after you have set everything), it should give you full hashrate.

[BSAI]

Thank you about GPU0 advice. Yeah, I know that but I just want to keep it connected.

About power oscillatation, its same on my side as well. I’ve tested several miners LHR bypass feature, and observed similar behavior. I guess thats how it try to mimic non ETH mining.

[BWideas]

You are correct. It appears each mining software is using this variable power consumption to get around the LHR locks.

FYI - I’ve let this rig run for a couple of days now and it’s averaging 281.9 MHs with 7 GPUs (all v1 3060s). That’s 40.27 MHs per GPU and it’s stable with 99.28% accepted shares. I’m done tweaking this rig until something better comes along.

[BSAI]

Same here. I’ll stick with miniz until other miner improve unlock feather.

[Frenzo]

Thanks for share, I will try with my 3060

[Loloboy]

Hi Pal @BWideas ,

Any updates on your stale/invalid shares? I tried that config but I am struggling on the stale/invalid shares.

[BWideas]

I am averaging better than 99.3% valid shares. I am very happy with this performance and I don’t plan to change.

[Loloboy]

Let’s keep in touch with the performance. I’m still observing but so far I like how it goes. I’ll just set aside the number of stales/invalid until such time the developer find its way to make it perfect.

BTW, thanks a lot for sharing and making this thread.

[snolax]

I’m currently having the same issue. I was getting the 50 MH but with the 3070ti installed (465.31) im hovering at 38. What a shame.

[vlkoslak]

Sorry man, i sold my 3070ti and i never tried to mine with it.For what i know the 3070ti are all LHR and For what i read about it, you should try it with “newer” driver version something like 470,xx. You should read some 3070ti topic on this forum and maybe ask there.
I m Sorry that i couldn’t help more.