I read that mining ETH+ERG is not the only option. We can also mine ETH+RVN and ETH+CFX with this new Trex. I think that ETH+RVN should be most profitable for now.
3070ti can make 77mh/s on ETH?
I think normally 3070ti makes 50-52 mh/s on ETH due to LHR that is ~3.08 usd/day (Ref: whattomine)
If dual can make 24mh/s on ETH and 125mh/s on ERG, that’d be ~3.04 usd/day (Ref: whattomine)
May be ETH+RVN could be a better pair, ERG price is falling.
you can do RNV also you can check the t-rex wiki here For Overclock sugestion and more parameter setting
I’m sorry my friend, it is late night and I mix up eth with CFX.
77 IS CFX HASHRATE.
I see no difference on my 3070 Ti
Separately ETH 55 ERG 192,5
All rows same efficiency (ETH 55 or ERG 192,50)
ETH + ERG
ETH 55 + ERG 0 same as (ETH 55 or ERG 192,50)
ETH 54 + ERG 3,50 same as (ETH 55 or ERG 192,50)
ETH 53 + ERG 7,00 same as (ETH 55 or ERG 192,50)
ETH 52 + ERG 10,50 same as (ETH 55 or ERG 192,50)
ETH 51 + ERG 14,00 same as (ETH 55 or ERG 192,50)
ETH 50 + ERG 17,50 same as (ETH 55 or ERG 192,50)
ETH 49 + ERG 21,00 same as (ETH 55 or ERG 192,50)
ETH 48 + ERG 24,50 same as (ETH 55 or ERG 192,50)
ETH 47 + ERG 28,00 same as (ETH 55 or ERG 192,50)
ETH 46 + ERG 31,50 same as (ETH 55 or ERG 192,50)
ETH 45 + ERG 35,00 same as (ETH 55 or ERG 192,50)
ETH 44 + ERG 38,50 same as (ETH 55 or ERG 192,50)
ETH 43 + ERG 42,00 same as (ETH 55 or ERG 192,50)
ETH 42 + ERG 45,50 same as (ETH 55 or ERG 192,50)
ETH 41 + ERG 49,00 same as (ETH 55 or ERG 192,50)
ETH 40 + ERG 52,50 same as (ETH 55 or ERG 192,50)
ETH 39 + ERG 56,00 same as (ETH 55 or ERG 192,50)
ETH 38 + ERG 59,50 same as (ETH 55 or ERG 192,50)
ETH 37 + ERG 63,00 same as (ETH 55 or ERG 192,50)
ETH 36 + ERG 66,50 same as (ETH 55 or ERG 192,50)
ETH 35 + ERG 70,00 same as (ETH 55 or ERG 192,50)
ETH 34 + ERG 73,50 same as (ETH 55 or ERG 192,50)
ETH 33 + ERG 77,00 same as (ETH 55 or ERG 192,50)
ETH 32 + ERG 80,50 same as (ETH 55 or ERG 192,50)
ETH 31 + ERG 84,00 same as (ETH 55 or ERG 192,50)
ETH 30 + ERG 87,50 same as (ETH 55 or ERG 192,50)
ETH 29 + ERG 91,00 same as (ETH 55 or ERG 192,50)
ETH 28 + ERG 94,50 same as (ETH 55 or ERG 192,50)
ETH 27 + ERG 98,00 same as (ETH 55 or ERG 192,50)
ETH 26 + ERG 101,50 same as (ETH 55 or ERG 192,50)
ETH 25 + ERG 105,00 same as (ETH 55 or ERG 192,50)
ETH 24 + ERG 108,50 same as (ETH 55 or ERG 192,50)
ETH 23 + ERG 112,00 same as (ETH 55 or ERG 192,50)
ETH 22 + ERG 115,50 same as (ETH 55 or ERG 192,50)
ETH 21 + ERG 119,00 same as (ETH 55 or ERG 192,50)
ETH 20 + ERG 122,50 same as (ETH 55 or ERG 192,50)
ETH 19 + ERG 126,00 same as (ETH 55 or ERG 192,50)
ETH 18 + ERG 129,50 same as (ETH 55 or ERG 192,50)
ETH 17 + ERG 133,00 same as (ETH 55 or ERG 192,50)
ETH 16 + ERG 136,50 same as (ETH 55 or ERG 192,50)
ETH 15 + ERG 140,00 same as (ETH 55 or ERG 192,50)
ETH 14 + ERG 143,50 same as (ETH 55 or ERG 192,50)
ETH 13 + ERG 147,00 same as (ETH 55 or ERG 192,50)
ETH 12 + ERG 150,50 same as (ETH 55 or ERG 192,50)
ETH 11 + ERG 154,00 same as (ETH 55 or ERG 192,50)
ETH 10 + ERG 157,50 same as (ETH 55 or ERG 192,50)
ETH 9 + ERG 161,00 same as (ETH 55 or ERG 192,50)
ETH 8 + ERG 164,50 same as (ETH 55 or ERG 192,50)
ETH 7 + ERG 168,00 same as (ETH 55 or ERG 192,50)
ETH 6 + ERG 171,50 same as (ETH 55 or ERG 192,50)
ETH 5 + ERG 175,00 same as (ETH 55 or ERG 192,50)
ETH 4 + ERG 178,50 same as (ETH 55 or ERG 192,50)
ETH 3 + ERG 182,00 same as (ETH 55 or ERG 192,50)
ETH 2 + ERG 185,50 same as (ETH 55 or ERG 192,50)
ETH 1 + ERG 189,00 same as (ETH 55 or ERG 192,50)
ETH 0 + ERG 192,50 same as (ETH 55 or ERG 192,50)
After all my tests there is no difference between t-rex 23.2 and 24.0
ERG is in low profitability right now, try RVN
i just tested it and it’s currently in unlocking mode.
at your drop down of your miner setup. you select 0.24 and it will automatically download 0.24.
with this result i think i’ll stick to mining one algo.
i got a good result with 47 on 3070lhr and 40 on 3060ti lhr
Hi,
I tried on my 3060 Ti RVN + ETH but I have a problem.
Exactly the same problem as this guy : https://youtu.be/we2jb7m6pAI?t=79 (timer 1:19)
The hashrates are both very low on ETH and RVN, and these messages appears :
LHR tune starts at 30 then go to 29, 28, … and never stops going down.
The only solution is to lower power limit (140W) but when I do, my hashrate on RVN is low (15 mhs when I should expect 28.5x0.7 = 20 mhs). Which seems normal since I need 180W when mining RVN only.
With 140W on power limit I have 17 mhs on ETH which is close to what is expected (0.3x60=18 mhs) so no problem here.
Any idea how I could increase my hashrate on RVN without having this “lhr tuning” problem ?
Sounds like a great concept to mine dual in LHR mode. But is it more profitable to run in dual than single coin? For example eth+rvn is more profitable than only mine rvn? From what I speculating it seems like it’s not significant gain from it right? I’m waiting for official release of the new t-rex on HiveOS.
I just run a 12-hour test with 3060 TI LHR (Samsung) cards usually ran 42 MH/s + 120 W on eth = 2.6 USD as of today.
Trex Dual ETH + RVN got 20 + 17 on 140W = 1.6 + 1.3 = 2.9 USD as of today.
Conclude to be around 1x% increase in profitable from 70% to 8x% which is huge.
the same result comes with 3060, but for 3070TI is still tricky.
A future is sure brighter!
Just imaging 50% eth 50% RVN or even 70% Eth 30% RVN!
Hi,
So T-Rex 0.24.2 was out and tried to use it with using the same way that you wrote.
I made 0.24.2 folder and created symbolic link to 0.23.2 but didn’t work following error below…
/hive/miners/t-rex/h-run.sh: line 18: t-rex: command not found
Sorry I’m so noob at Linux.
Could you teach me how to make it work?
Cool bro. 10% increase is quite nice. Right now, I notice that I can select T-rex 0.24.0 in flight sheet. But somehow the default version (latest version) is still using 0.23.2. This is kinda weird.
Thats AWESOME!
Can you let me know OC setting of your 3060ti Samsung, and actual parameter of t-rex?
(Appreciate if you can share me 3060 OC setting and actual parameter of t-rex as well)
I’m sorry to ask alot.
I just manage to stably pull out around 95% capacity on 3060 12GB LHR V2
15MH ETH = 30% of 50MH full capacity.
15MH RVN = 65% of 23MH full capacity.
Here is my OC & driver running this rig, Stable for 17 HRs now.
2 Likes
Here are the results of 3060TI [ Samsung Mem ]
3060 TI seems to be a lot more unstable than 3060, my assumption is because of low Mem capacity, should be better in a further update.
The ideal Hash rate is supposed to be.
20 MH ETH = 30 % of 60 MH full capacity.
19.5 MH RVN = 70 % of 28 MH full capacity.
what I got fluctuate from 20 to 15 for both coins. but 24 hours outcome still beat single coin mining on all coins around 1x%.
1 Like
The perfect combination should be ERG + ETH because both are locks from LHR.
But from my testing with dual mining both locked coins, LHR algo seems to be very aggressive. Can’t manage to run stably even for over 30 mins, so I just go with easier pair ETH + RVN.
Will wait for further update from the dev.
1 Like
Thats fantastic!
Thank you alot!