Phoenixminer

salvo2002 · September 16, 2018, 7:42pm

Reporting ~29 hrs of testing between PhoenixMiner 3.5c and Claymore 11.9

PhoenixMiner had a 46 accepted share margin over Claymore

Both running on Hiveon ETH pool
Each has 2 x RX570s 8Gb & 2 x RX580s 8Gb
Each miner set to autotune
HiveOS autofan control

=== /hive/custom/phoenixminer/config.txt =================================================
#DONT EDIT THIS FILE, IT WILL BE OVERWTITTEN AFTER UPDATE

-logfile /var/log/miner/phoenixminer/lastrun_noappend.log

-mport 3335
###USER CONFIG###
-gpus 5678

=== /hive/claymore/latest/config.txt =================================================
#DONT EDIT THIS FILE, IT WILL BE OVERWTITTEN AFTER UPDATE

#Management port, readonly
-mport -3333

#run reboot.sh on GPU hangs
-r 1

#Log to the same file
-logfile /var/log/miner/claymore/lastrun_noappend.log

-allpools 1

#Only Ethereum
-mode 1

###USER CONFIG###
-ftime 10
-di 0123
-tt 1

ut9ea · September 18, 2018, 10:12am

вышел PhoenixMiner 3.5d
кто пробовал карты амд запустились ли на новом образе с новыми дровами и ядром ?
или ничего не изменилось 57 образ рулит ?

ATrump · September 18, 2018, 12:15pm

Обновил. Я бы не рассчитывал, что до 3.6 что-то глобальное поменяется.

salvo2002 · September 19, 2018, 3:04am

agreed – they are planning for 3.6 to have full hardware control.

camando · September 20, 2018, 9:28am

phoenixminer+nanopool
In the custom setting, the nanopool worker has not been displayed (waited for more than 6HR), where is the setting wrong?
(teleconsole sees Accepted shares are fine)

tgmac · September 20, 2018, 10:30am

any idea what this is and how I can fix it? :

custom phoenixminer exited, waiting to cooldown a bit Phoenix Miner 3.5d Linux/gcc - Release build -------------------------------------------- FATAL ERROR: Debugger detected

ATrump · September 20, 2018, 12:38pm

Try to add
, PSW: x
to pool defenition, like in my example at topic start.

tgmac · September 20, 2018, 9:12pm

was there all along, took it out, restarted, put it back in, still same error

ATrump · September 21, 2018, 8:53am

What Hive image are you using? What cards?
Try to flash hive-0.5-57 from previos versions

Majorwong · September 23, 2018, 1:55am

Do you like HIVEon better than ethermine? I wish they had US servers for Ethereum classic.

ATrump · September 23, 2018, 6:35pm

Hiveon is PPS pool with no fee. Of course I like it more than any others

Azzi · September 24, 2018, 6:24pm

Used to love Pheonix miner under windows, so was excited to see it was now allowed under HiveOS.

But try a I might, I jut cannot seem to get any hashrate out of the Miner.

it seems to be connecting to ethermine.org ok and collecting jobs, but I’m getting Zero hashrate on every card.
Any Ideas?

Azzi · September 24, 2018, 6:42pm

Example Screen Output, for info

Phoenix Miner 3.5d Linux/gcc - Release build                                                                                                                                                                                                                                              
--------------------------------------------                                                                                                                                                                                                                                              
                                                                                                                                                                                                                                                                                          
No OpenCL platforms found                                                                                                                                                                                                                                                                 
Available GPUs for mining:
GPU1: GeForce GTX 1080 Ti (pcie 1), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
GPU2: GeForce GTX 1080 Ti (pcie 2), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
GPU3: GeForce GTX 1080 Ti (pcie 3), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
GPU4: GeForce GTX 1080 Ti (pcie 4), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
GPU5: GeForce GTX 1080 Ti (pcie 5), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
GPU6: GeForce GTX 1080 Ti (pcie 6), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
Eth: the pool list contains 1 pool
Eth: primary pool: eu1-etc.ethermine.org:4444
Starting GPU mining                                                                                                                                                                                                                                                                       
Eth: Connecting to ethash pool eu1-etc.ethermine.org:4444 (proto: EthProxy)
Eth: Connected to ethash pool eu1-etc.ethermine.org:4444 (52.29.190.23)
Eth: New job #d20c1c4c from eu1-etc.ethermine.org:4444; diff: 4000MH                                                                                                                                                                                                                      
GPU1: Starting up... (0)                                                                                                                                                                                                                                                                  
GPU2: Starting up... (0)                                                                                                                                                                                                                                                                  
GPU3: Starting up... (0)                                                                                                                                                                                                                                                                  
Eth: Generating light cache for epoch #220                                                                                                                                                                                                                                                
GPU4: Starting up... (0)                                                                                                                                                                                                                                                                  
GPU5: Starting up... (0)                                                                                                                                                                                                                                                                  
GPU6: Starting up... (0)                                                                                                                                                                                                                                                                  
Unable to start CDM server at port 3335: Address already in use (98)
GPU1: 48C 0%, GPU2: 43C 0%, GPU3: 44C 0%, GPU4: 46C 0%, GPU5: 46C 0%, GPU6: 48C 0%
Eth: New job #fc003c1d from eu1-etc.ethermine.org:4444; diff: 4000MH                                                                                                                                                                                                                      
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth: New job #ccf96533 from eu1-etc.ethermine.org:4444; diff: 4000MH                                                                                                                                                                                                                      
Eth: New job #0a133fed from eu1-etc.ethermine.org:4444; diff: 4000MH                                                                                                                                                                                                                      
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
 
*** 0:00 *** 9/24 19:41 **************************************
Eth: Mining ETC on eu1-etc.ethermine.org:4444 for 0:00
Eth: Accepted shares 0 (0 stales), rejected shares 0 (0 stales)                                                                                                                                                                                                                           
Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%                                                                                                                                                                                                                             
Eth: Average speed (5 min): 0.000 MH/s
 
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth: New job #2de5c53f from eu1-etc.ethermine.org:4444; diff: 4000MH                                                                                                                                                                                                                      
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:01
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
Eth: New job #12ac154d from eu1-etc.ethermine.org:4444; diff: 4000MH

ATrump · September 24, 2018, 7:12pm

Looks like it’s a problem in miner.
Here are the same results with 1060: https://bitcointalk.org/index.php?topic=2647654.msg46090288#msg46090288

Could you try to flash hive-0.5-57 image from previos versions?

ut9ea · September 29, 2018, 4:35pm

Could you also try to fix problem with AMD cards? All of them are not detected by PhoenixMiner in HiveOS based on Ubuntu 18.04:

Code:

No OpenCL platforms found
No avaiable GPUs for mining. Please check your drivers and/or hardware.

This build is named “Bleeding edge” =) https://hiveos.farm/install

One of the problems we found with the latest HiveOS can be fixed by removing the LD_PRELOAD environment variable. To do so, please insert the HiveOS USB flash drive with the already setup as a custom miner and started at least once PhoenixMiner 3.5d on a PC and open the following folder in Windows explorer: /hive/custom/phoenixminer/ . There you will find a file named h-run.sh . Open it with Notepad and add the following line unset LD_PRELOAD immediately before above the command that starts PhoenixMiner:

Code:

unset LD_PRELOAD
./PhoenixMiner$@

If you are Linux-savvy, you can do this while HiveOS is running fron an SSH session and edit the file directly with the nano text editor.

ATrump · September 29, 2018, 5:21pm

Благодарю! Готово. Обнови майнер.

ut9ea · September 29, 2018, 7:20pm

запустился и майнит феникс на
Bleeding Edge

Oleg-69 · September 30, 2018, 5:32am

Bleeding Edge
виснет система
запускает Х и всё, черный экран с черточкой

ATrump · September 30, 2018, 8:29pm

Если риг на AMD, то выключи GUI в настройках рига на веб-морде. Для красных иксы не нужны!

Oleg-69 · October 1, 2018, 4:14am

именно в этой версии Bleeding Edge выключить GUI?
полгода не заморачивался, работало все.