Was wondering if I could get a little bit of help.
Trying to transitions my OC settings from Ergo to ETH, I’m assuming it should be a little different just not sure where to start.
How much MH should I be expecting each card to be around and with what settings are you guys getting those results?
RTX 3060Ti LHR: cclock: -500, mclock +1900, PL 140w
RTX 3060Ti LHR: cclock: +1300, mclock +2300, PL 130w
What hashrate are you getting on these OC’s
with gminer autotune of LHR (I am not adding any parameters on the miner config)
RTX 3060Ti: cclock: -200, mclock +1900, PL 130w = 39.7 mh/s @ 119w
RTX 3060Ti: cclock: +1350, mclock +1800, PL 130w = 39.67mh/s @ 130w
RTX 3060Ti: cclock: +1300, mclock +2000, PL 130w = 39.24mh/s @ 85w->130w
will still change coreclock to 0 and later to -500 and -600 to see how it behaves since I have seen some other people doing this way
I’m assuming with these settings it’s pretty stable? What memory on the cards? Samsung or Hynix?
Hynix, this is a 3060Ti from Zotac gaming.
the more stable with higher efficiency that I could get is this:
RTX 3060Ti: cclock: +1300, mclock +1900, PL 130w = 39.12mh/s @ 100w → gminer LHR2 [E:391.27 KH/W]
RTX 3060Ti: cclock: -500, mclock +2200, PL 130w = 40.74mh/s @ 130w
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.
