I have 4 Nvidia 3060 TI’s. Three are NON-LHR and are fine, one is an LHR and having challenges since the last update. Before the update a few days ago, I had the LHR stabilized and locked in around 41mh. However, once I did the update, it’s all over the place and unstable. Goes from 32-41mhs every few minutes. I am somewhat familiar with the command feature and have played with it however cannot seem to get the coding right to set it to lhr-mode-1. I tried going back to the older driver version and that did not help at all. So, I am back to the current driver and it’s bouncing. Help! I am sure this is user error. Thanks in advance!
1 Like
Hi,
More info
Miner … hive os version - client version … Driver version … and OC settings … and what coin you mine…
Here are the details: nbminer v.39.4, Hive OS version 0.6-210@210921, OC settings right now are -502, mem 2450 and PL130.
Driver version on hive os?
0.6-210@210921
I am confused by your reply. I am on the latest OS version, 0.6-210@210921. I was on a prior version and it worked fine. I have attempted to go back to 0.6-210@210909 and it kept fluctuating.
Check this …
Yes you have the latest Hive os image …but i dont know what driver he has (inside ) … Im ask u because i dont have the latest image and i dont know what driver for nvidia you have…
Anyway… I think for two reasons you have problem … Lower your mem at 2400 if the problem persist update your drivers in latest version … i think is 470.74 …
1 Like
Nvidia driver version is 460.84
Thanks I will give that a try.
ok… sry for my bad english…
Not an issue. Thanks for the assist. I will keep you posted on if that works.
It appears that worked. I am going to continue to monitor but so far it seems stable. Thank you @nanial
1 Like
You are welcome…
New to HiveOS. This is on 39.1 NB miner. All LHR cards. It’s what I was using in Windows and seems more stable than 39.4
I have following issue with this 5 card. anyone can help how to fix
try NBminer 39.2 40-42mhs
is it stable?
Hi Oldtree
what are your OC settings ?