So I am relatively new to mining. The rig in question has the following specs:
MSI MPG z490 gaming edge wifi
10th gen I7 Intel cpu LGA1200
Corsair Vengeance DDR4 Ram 16gb
Corsair RM1000x 80 plus gold PSU
I bought to 6600 XTs one Asus and one Red Devil. I installed the Asus first on the board. I had no issues. I used TeamRedMiner and everything worked great. I then connected the red devil to a riser card. The rig appeared to boot okay and TRM booted. They both began mining but within minutes I got a temp warning and I realized the Red Devils fan was not spinning. I shut the rig off checked the connections and restarted. On the second restart both cards fans started spinning on boot and then stopped as usual during the boot but never started again once mining. Now I can’t get either cards fans to spin. They both will mine but the temp quickly heats up and I don’t want to let them get past 90 degrees Celsius. I tried switch flight sheets, mining software, and turning on auto fan in both TRM and Hive.
Any help would be greatly appreciated!