SO. i have 4 6700 xt and 1 3070 running dual miner: teamredminer, T-rex
I’m pulling my hair out on this one. I ran into an issue where the rig would stop mining all together and give me this error: GPU driver error, no temps, rebooting. it would stop mining and just idle after the reboot unless I rebooted from the MOBO. I thought it may be a power issue or riser issue.
I replaced the risers, cables, redid the power to ensure it was single cables to each card and to each riser. I’m using 2 1000w gold ATX to power them.
Riser
https://www.amazon.com/gp/product/B076KLJR2Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It ran perfect for 8 hours or so then I ran into problems again. >teamredminer: GPU 3: detected DEAD
If i do a power down and power up from the mobo Hive will read all the cards. Sometimes it will mine for around 8 hours. Then once it begins to have the errors it will give me the error: >teamredminer: GPU 3: detected DEAD
Now the weird part is that after it reboots on its own it will mine PERFECTLY FINE on the 3070 and 1 6700xt. but it will not use or see the other 3 unless i do a full power down and boot. I have tried the latest stable, latest beta, downgrading both and then going back to latest.
this is the script for the error
[2021-11-10 17:20:09] GPU 1: detected DEAD (07:00.0), will execute restart script watchdog.sh
[2021-11-10 17:20:09] GPU 2: detected DEAD (0a:00.0), will execute restart script watchdog.sh
[2021-11-10 17:20:09] GPU 3: detected DEAD (0d:00.0), will execute restart script watchdog.sh
[2021-11-10 17:20:09] Watchdog script executor thread executing script ‘watchdog.sh’
See overclocks and version.
Any advice would be appreciated. Thanks fam