Added a 3060 TI (LHR) to a 4x 3070 (FHR) Rig - Card Detects But Wont Mine

[drfrag]

Hey guys, so I tried adding my new Aorus 3060 TI LHR to this already existing (and working) 3070 full hashrate rig. Hive detects the card but it won’t start mining. I updated the nvidia drivers tonight to but that didn’t help. Please see below for a screen cap.

[Westy]

Hey There,
Try loading Nvidia drivers 460.91 and try loading the following start points on your clocking setings.
FA 85| CL 100 | MCL 3000 |PL 120
Shell into the miner and run miner by

Type## miner ## then enter##

##then Type## nvidia-driver-update 460.91##then enter##

This should install the 460.91 Drivers … which run pretty good on my RTX 306 LHR cards
Let me know if that works.

[drfrag]

ok thanks I’ll give that a try and let you know!

[keaton_hiveon]

try the card by itself, directly on the motherboard. it shouldnt be a driver issue if the others are working and the version is new enough.

[drfrag]

so it actually turned out to be an issue with the board. I couldn’t get a 6th card to run…tried 3 different models. The Aorus worked fine direct on the board and in another system…got 43mhs solid. thanks for the help!

[Westy]

so you could get it running with a GPU directly plugged into the PCIE x4/8/16 slot but not with a riser?

[drfrag]

actually I got it running on a riser too but had to remove other cards…no matter what that mobo maxes out with 5 cards…even though it has 6 pcie ports.

[Westy]

hmmmm I wonder if a 1-4 port riser would work?

[drfrag]

I tried an NVME to PCIE adapter and that wouldnt even boot. I guess I can try one of these 1-4.