What miner are you using? If it’s nvidia specific then it will not pick up the AMD card. If its AMD/Nvidia compatible, you need to check the miner by ssh/telnet/shellinabox into the miner and look at the error it is generating.
Finally you can create a flight sheet with Nvidia and AMD specific miner if you want to try that out.
The 5000 series memory tends to run hot. Just bump up your fan speed if your concerned, but 80 c is fine. You might some of the presets for the 5600XT that are available if your adventurous.
The temp of the memory runs very hot. You are right about that.
I have been mining for 4-5 years using only NVIDA-cards so this was my first attempt with AMD. Living in Oslo/Norway I take whatever card I can get my hands on, so…
After testing various presets, which didn’t work for me, I played around with various settings for hours and I ended up with something that somewhat made the card kind of stable. The temp jumps up and down between 80 and 90 degrees depending on the temperature in the room I guess. The rig is on top of another rig and placed in what used to be our dinning room.
Anyway, thanks for the tips and advice.
Here’s the setting I ended up with. It gives me 38.15 MHz, power consumption 88 watt. (I adjust the fan-speed manually once in a while.)
Glad you got that stable and running. I just toasted my rx 480 4GB playing with settings. Not really bummed by that, just part of the mining gig. With luck I might get ASUS to RMA it (fat chance, but guy has got to try)