hello firtst check my setup:
Asrock h110 pro btc+
i5-6400
1800w
8gb ram 2133
My rig work with 10 card stable for last 20 days, yesterday rig get glitch ofc i restart it and rig dedect problem with one card and here we go, i need to change bios setings for 10 cards but after clear cmos rig not show nothing on screen. cpu work , gpu prapobly work too becouse goes hot after few minuts.
i cant do nothing becouse screen is always black.
what i do with this-
unplug everything from motherboard
check card in other device
check monitor
start main card in slot pci 16
power suply is corect
flash and instal new hiveos on usb
Use 2 sticks of 8gb ram 2400mhz… You should use processors like pentium or at max i3… I5 and I7 had many issues with h110 pro btc+…
Btw which gpus are you using and what’s your settings ?
Assuming you had applied the MoBo tweaks to operate more than 9+ cards, there is a funny issue with the board. If you reboot the board without a monitor plugged into the main PCI slot GPU, the CMOS will be enable again, therefore disabling the work with more than 9 GPUs and you will get the black screen and no reboot. To solve this (and not having a monitor plugged), I added a dummy HDMI 4K to the GPU in the main slot and I can now hard reset without issues. I suggest you try to work with 9 GPUs and see if the reboot will work fine. If it does, it is likely the CMOS reset (it should remain disabled and a monitor or dummy monitor plugged)