I ordered an Asus B250 which came in today, I’ve hooked it up and nothing seems to be working. The CPU fan turns on and the GPU also turns on however there’s no signal on the screen.
I’ve tried everything I could think off but it doesn’t show anything on screen.
The Specs
PSU: Corsair AX1200i
CPU: Intel i3 6100T
Ram: 2x 4GB Corsair
Is there anything I need to do specifically to get this working?
Did you check that the bios set to use the onboard video card?
Thanks AlleyCat, I don’t even get into bios, nothing shows on the monitor at all. I also tried it with a graphics cards and no signal.
Do you have any GPU plugged in the board? If yes, remove all the cards, you should be able to access to the board.
I tested both use cases (i.e. With GPU plugged in as without)
When GPU is plugged in I connected the hdmi to the GPU and no signal was received.
When GPU is unplugged, the hdmi is plugged to the motherboard hdmi port and yet no signal
Did you try to reset the board using the reset pins?
Try to reset the board, and start is with no GPUs.
Did that no luck. 
It’s worth noting that when I reset the bios (i.e. Removed the cmos battery and shorted the clear jumper) when I turn it on is reacts differently at first which suggest the reset was acknowledged. Still didn’t get any signal
I don’t know what else to suggest. It looks like you are stuck with a bare system booting.
Did you check that the bios set to use the onboard video card?
Hello all, thanks for your suggestions. I have resolved this issue; it turns out the board does not like the Intel i3 6100T processor. I bought a i5 and it worked immediately. I still don’t know the technical reasons for this as the i3 processor was in the list of supported CPUs.
Hello. I decided to write a few words about this language. Although Python is promoted as a language for everything, in fact, it has only two areas of application: all sorts of data science, ML and other mathematics - and web development. In this, it disappointed me a little. I had to ask for a python assignment help several times, but I figured it out on my own. Now I think about what language to learn next. Guys, what do you recommend?
It has to be the 6th and 7th gen CPU, see this list:
I just saw the Intel i3 6100T is a 6th gen CPU, so I don’t know… weird.
Thanks. I guess for anyone trying to build a rig with the Asus B250, I’ll recommend not to use the i3 6100T. Its a low powered CPU (@35W); this could be a contributing factor.
Drawings to order - specialist in making drawings and 3D models for students. The service works around the world with qualified, dedicated and brilliant graphic specialists who know how to correctly and timely draw customer drawings. The service has a website - https://kompaswork.ru where you can view technical articles and work examples.
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.
