Running latest HiveOS (as of 10/28/21) and I was attempting to OC these cards after they have been running flawlessly for the last 5 days on default settings. Previously I was getting about 100 MH total.
These are the results when not running any OC config:
But when attempting to OC, using the suggested config from hashrate.no I keep running into “GPU driver error, no temp” errors.
After initial OC config loads, I am getting between 30-35 MH, but then after a few minutes I start getting the error and the cards stop reporting their MH and temp accurately.
i was told not to use the negative/relative setting and that the absolute equivalent setting works better…you’ll have to work it out from your cards clock speed IDK exactly. i have 3080.
why hvae you limited the power to 180? do zero or 230/240
your temps look good. could go a tad higher but keep as is.
@smarkhive this config seems to be working really well and the reason I’ve stuck with it is because even whattomine.com shows that I am getting exactly what they expect me to get for RVN. I’ve made some tweaks over the past 24 hours or so and I keep coming back to the settings you see above.
