I’m a fairly new miner and decided to use HiveOS on my first rig for it’s new user-friendly usage. The card I can’t get recognized is an individual card. Let’s call it A and let’s call a working card B.
-
First boot, A doesn’t work. After a couple of reboots, i still can’t get it recognized. A prominent error I see everytime I boot up is “failed to recognize GPU init” checked the linux forums but can’t find a conclusion.
-
Swapped the A and B’s support units completely (risers, power cables etc.) B still works and A still doesn’t work.
-
Changed A’s overclock settings to be on the safe side. Nope.
-
Motherboard slots are working.
-
Tried to boot up with a HDMI cable plugged to a GPU instead of CPU graphics. Nope.
-
Tried to boot up with no monitor and without using CPU graphics.
-
Tried Gen2 PCIe slots, working fine for 4 RX580’s and 1 RX570. Haven’t tried Gen1 or else.
I’d really want to provide linux command outputs, but I don’t know how to navigate around the linux terminal. As I said, one of the most prominent one was “failed to recognize GPU init” . This occured whenever I plugged A into the PCIe slot.
At this point I’m severely out of ideas, every trial and error idea and every solution is greatly appreciated. Here’s my hardware:
GPU’s : RX570 , 5 RX580 (A is a RX580)
Motherboard : ASUS STRIX H270F
PSU : 1200W platinum plus full modular PSU
RAM : 8GB 2100 MHz
General overclocks for cards : Core (1175) , Mem (2155) , mV (850)