I have one card that just refuses to cool down for me. I have relocated to an open air rig, plenty of airflow, even have one of those “turbo fans” I borrowed from the wife blowing on the rig… It’s not dangerously hot but I want it to be below 70 like its twin… Any suggestions? Should I disassemble and replace thermal pads? I have fans set to autofan, but even when I forced it to run 100% it won’t drop below 72 so I would rather not hear the card screaming if the temp remains the same… lol
There is also that EVGA 1660 that runs fine but stopped reporting fan speed… on reboot it comes back but then goes away again… It’s an old card so I’ll probably just retire it???
72c on memory isn’t high at all. I wouldn’t worry about that. Also, your 1660 is crashing the driver from too aggressive memory clocks, reduce and reboot until stable.
RE: 1660
Dropped it to 2000 - no joy
Dropped it all the way to 1100 getting an error…
=== GPU 2, 04:00.0 GeForce GTX 1660 5944 MB, PL: 70 W, 120 W, 120 W === 10:36:39
SET POWER LIMIT: 70.0 W [Unknown Error]
(exitcode=123)
SET GPU CLOCKS: 1050 MHz
Max Perf mode: 2 (auto)
Attribute ‘GPUGraphicsClockOffset’ was already set to 0
ERROR: Error assigning value 1100 to attribute
‘GPUMemoryTransferRateOffset’ (Rig02:0[gpu:2]) as specified in
assignment ‘[gpu:2]/GPUMemoryTransferRateOffset[2]=1100’ (Unknown
Error).
(exitcode=100)
Actually it seems stable now, at least for a few minutes.
nvidia-info:
=== GPU 2, 04:00.0 GeForce GTX 1660 5944 MB ===
Bios 90.16.34.00.AE, PCIE Link Gen 2, PCIE Link Width 1x
S/N -, UUID GPU-2977fa18-ed99-095f-5b29-86cab0dc019d
Power Limit: Min 70.0 W, Default 120.0 W, Max 120.0 W, Current 70.0 W
Frequency: GFXCore 1050 MHz, MEMCore 4550 MHz
Memory: Total 5944 MB, Used 4952 MB, Free 992 MB, Hynix GDDR5
Utilization: GPU 100 %, MEM 100 %, Throttle: None
PSTATE P0, PWR 53.0 W, Temp 50 °C, Fan 47 %, RPM 1415 (25 %)
root@Rig02:/#
=== GPU 2, 04:00.0 GeForce GTX 1660 5944 MB, PL: 70 W, 120 W, 120 W === 10:45:31
SET POWER LIMIT: 70.0 W
SET GPU CLOCKS: 1050 MHz
Max Perf mode: 2 (auto)
Attribute ‘GPUGraphicsClockOffset’ was already set to 0
Attribute ‘GPUMemoryTransferRateOffset’ was already set to 1100
Attribute ‘GPUFanControlState’ (Rig02:0[gpu:2]) assigned value 1.
Attribute ‘GPUTargetFanSpeed’ (Rig02:0[fan:2]) assigned value 100.
