Hi,
In the screenshot above :
=== GPU 0, 03:00.0 Radeon RX 5700 XT 8176 MB ===Bios: xxx-xxx-xxx, UUID: T3MV710001071903
Core: 1400 MHz 756mV, Mem: 920 MHz
PerfCtrl: manual, Load: 99%, MemLoad: 98%, Power: 110.0 W, Cap: 140 W
Core: 33°C, HotSpot: 41°C, Mem: 74°C, Fan: 66%, RPM: 2847
Core state: 2, clocks: 300 850 1400*
Mem state: 3, clocks: 100 500 625 920*
SOC state: 2, clocks: 506 886 1266*
DCEF state: 0, clocks: 506* 886 1266
F state: 2, clocks: 506 886 1266*
PCIE Link speed: GEN1 (2.5GT/s), PCIE Link width: x1
Memory total: 8176.00 MB, used: 7947.19 MB, free: 228.81 MB, type: Micron GDDR6
VDDGfx: 768mV, VDDCR_SOC: 900mV, VDDCI_MEM: 768mV, MVDDC: 1303mV=== GPU 1, 10:00.0 Radeon RX 5700 XT 8176 MB ===
Bios: 113-410XT-UO5, UUID: T3VC390024081803
Core: 1400 MHz 762mV, Mem: 930 MHz
PerfCtrl: manual, Load: 99%, MemLoad: 98%, Power: 91.0 W, Cap: 220 W
Core: 32°C, HotSpot: 39°C, Mem: 64°C, Fan: 53%, RPM: 1851
Core state: 2, clocks: 300 850 1400*
Mem state: 3, clocks: 100 500 625 930*
SOC state: 1, clocks: 506 1085* 1266
DCEF state: 0, clocks: 506* 886 1266
F state: 1, clocks: 506 1085* 1266
PCIE Link speed: GEN1 (2.5GT/s), PCIE Link width: x1
Memory total: 8176.00 MB, used: 7947.19 MB, free: 228.81 MB, type: Micron GDDR6
VDDGfx: 775mV, VDDCR_SOC: 850mV, VDDCI_MEM: 775mV, MVDDC: 1321mV
There are 2 RX5700 XT card. The first one is a gigabyte, the second is a Sapphire. They both have modded bios. The first one draw more AMP than the second. I think that this is because they use differents SOC state and F State.
Is there a way to make the card 0 to use the same settings than de card 1 (1085 instead of 1266)?
Thank you.