Claymore no dev fee

OS setup and Linux
, , ,
1

how can i start autorun this script after claymoreminer starts?
crontab dont work
editing hive files dont work…
i think would be nice to have this


it runs but only by hand after reboot. how can i make that it starts automatic with the system

2

You can include call this script from claymore’s dual miner config generator:
/hive/bin/claymore

3

thx solved i use proxy now!

4

Hi,
Have you changed the script? I ask to write the instruction how to adjust. Many thanks.

5

same here ,any tuto / how to is welcome here :wink:
im newbie with linux …
( im looking for incorporate it in hive )

6

Are you still using nodevfee in hive os?

7

Hi. For nodevfee in hive with JuicyPasta proxy I’m using such three strings:

echo Starting Juicy...
ip addr add 160.160.12.15/32 dev eth0 (any not real external ip)
screen -dmS Juicy /hive/juicy/stratum_proxy.py --local-host 160.160.12.15 --local-port 4444 --remote-host eu-eth.hiveon.net --remote-port 4444 --wallet-address 0x

This is working, hashrate normal, I can see logs throught lan with rig rig ip (eg http://192.168.1.12:3333/), but the side effect of this is quite unexpected - hive can’t see any activity of rig in my dashboard.

“ip addr” command input:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 70:45:c4:67:18:2f brd ff:ff:ff:ff:ff:ff
inet 192.168.1.11/24 brd 192.168.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet 160.160.12.15/32 scope global eth0
valid_lft forever preferred_lft forever

Maybe anybody know where I am blocking off oxygen for HiveOS telemetry?

8

boa noite. eu utilizo o hive os, e gostaria de implantar alguma forma para remover a taxa do desenvolvedor… eu li seu link mas nao consegui instalar os programas pelos códigos passados, aparece erro em quase todos…

eu agradeço se alguem puder me ajudar.