I noticed that the fan speed shows two different values. Could this be that one displays the average and the other the instantaneous value? Though I’ve seen 0 in both fields
The cards aren’t drawing much power, so the fans probably don’t need to run all the time. Besides, it is a 3-fan model and usually keeps low fan speeds even when doing hard work. Just saw this
Fan 44 %, RPM 581, RPM 580
The temperature seems to stay around the set point. However, the auto fan has a minimum value but it is being ignored. I tried 25, 30, and 40% as minimum speeds.
Where are you getting that fan info from?
Also, can you show your autofan settings?
which of all? the rpm? nvidia-info
Should be the different fan controllers for that card.
If you changed from the default that’s comes with the latest stable image, What driver are you on? What version of nvtool are you running?
Do you have any of the miners controlling fan speed? Can you show the entire flight sheet?
HiveOS Nvtool 1.7.6
Driver version: 520.56.06
DEVICE #0:
DEVICE #1:
DEVICE #2:
DEVICE #3:
DEVICE #4:
DEVICE #5:
DEVICE #6:
DEVICE #7:
cat /hive-config/autofan.conf
ENABLED=1
TARGET_TEMP=61
TARGET_MEM_TEMP=67
MIN_FAN=30
MAX_FAN=83
CRITICAL_TEMP=73
CRITICAL_TEMP_ACTION="shutdown"
NO_AMD=
REBOOT_ON_ERROR=1
SMART_MODE=1
cat /hive-config/wallet.conf
### FLIGHT SHEET "" ###
# Miner bzminer
BZMINER_ALGO="kaspa"
BZMINER_ALGO2=""
BZMINER_TEMPLATE="kaspa:wallet"
BZMINER_TEMPLATE2=""
BZMINER_WORKER=""
BZMINER_WORKER2=""
BZMINER_URL="us.acc-pool.pw:16061
ca.acc-pool.pw:16061
eu1.acc-pool.pw:16061
eu2.acc-pool.pw:16061"
BZMINER_URL2=""
BZMINER_PASS=""
BZMINER_PASS2=""
BZMINER_DISABLE_GPUS="0-4,8"
BZMINER_TLS="0"
BZMINER_TLS2=""
BZMINER_LHR=""
BZMINER_LHR2=""
BZMINER_INTENSITY=""
BZMINER_USER_CONFIG='"clear_log_file": true
"log_file_verbosity": 2
"hung_gpu_restart_bzminer": true
"oc_lock_core_clock": [1470]
"oc_core_clock_offset": [300, 325, 325]
"oc_lock_memory_clock": [810]
"disable": "[5:0 7:0 8:0 9:0 11:0 17:0]"'
BZMINER_VER=""
# Miner lolminer
LOLMINER_ALGO="ZEL"
LOLMINER_ALGO2=""
LOLMINER_TEMPLATE="wallet"
LOLMINER_TEMPLATE2=""
LOLMINER_WORKER=""
LOLMINER_WORKER2=""
LOLMINER_SERVER="us-flux.fluxpools.net
eu-flux.fluxpools.net"
LOLMINER_SERVER2=""
LOLMINER_PORT="7001
7001"
LOLMINER_PORT2=""
LOLMINER_PASS="x"
LOLMINER_PASS2=""
LOLMINER_TLS=""
LOLMINER_TLS2=""
LOLMINER_USER_CONFIG='--devices 4,8'
LOLMINER_VER=""
# Miner teamredminer
TEAMREDMINER_ALGO="kawpow"
TEAMREDMINER_ALGO2=""
TEAMREDMINER_TEMPLATE="wallet"
TEAMREDMINER_TEMPLATE2=""
TEAMREDMINER_WORKER=""
TEAMREDMINER_WORKER2=""
TEAMREDMINER_URL="stratum+tcp://americas.kawpow.mining-dutch.nl:9985
stratum+tcp://kawpow.mining-dutch.nl:9985"
TEAMREDMINER_URL2=""
TEAMREDMINER_PASS="d=188"
TEAMREDMINER_PASS2=""
TEAMREDMINER_USER_CONFIG='--kernel_vm_mode=RR
--prog_hash_report
-d 0'
TEAMREDMINER_USER_CONFIG2=''
TEAMREDMINER_TLS=""
TEAMREDMINER_TLS2=""
TEAMREDMINER_VER=""
TEAMREDMINER_INTENSITY=""
# Miner gminer
GMINER_ALGO="kawpow"
GMINER_TEMPLATE="wallet"
GMINER_HOST="americas.kawpow.mining-dutch.nl
kawpow.mining-dutch.nl"
GMINER_PORT="9985
9985"
GMINER_PASS="d=188"
GMINER_TLS=""
GMINER_ALGO2=""
GMINER_TEMPLATE2=""
GMINER_HOST2=""
GMINER_PORT2=""
GMINER_PASS2=""
GMINER_TLS2=""
GMINER_INTENSITY=""
GMINER_USER_CONFIG='--devices 1 2 3'
GMINER_VER=""
# Miner srbminer
SRBMINER_ALGO="ghostrider"
SRBMINER_TEMPLATE="wallet"
SRBMINER_WORKER=""
SRBMINER_URL="stratum-na.rplant.xyz:7084"
SRBMINER_PASS="x"
SRBMINER_TLS=""
SRBMINER_USER_CONFIG='--disable-gpu
--cpu-threads 3
--keepalive true'
SRBMINER_ALGO2=""
SRBMINER_TEMPLATE2=""
SRBMINER_WORKER2=""
SRBMINER_URL2=""
SRBMINER_PASS2=""
SRBMINER_TLS2=""
SRBMINER_USER_CONFIG2=''
SRBMINER_VER=""
META='{"bzminer":{"coin":"KAS"},"lolminer":{"coin":"FLUX"},"teamredminer":{"coin":"NEOX"},"gminer":{"coin":"NEOX"},"srbm
iner":{"coin":"jagoancoin"}}'
I would try going back to the latest stable image/driver/nvtool if you need autofan
Thanks. Seems to been working better now. Maybe the weather warmed up, and passed the threshold for the fans?
aminer
November 29, 2022, 9:53am
8
This is not an issue of HiveOS afaik. Even on windows, some 3000-series cards don’t handle fan speeds lower than 45% very well. They fall into fan-stop mode, spin erratically etc etc. I am using 45% (or 50%) as minimum.
system
Closed
January 20, 2024, 12:54am
9
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.