Hello!
I realized that for my Gigabyte RTX 3060 TI works with better hashrate (58mh/s) it have to be at 65ºC more or less. But i have 6 more cards and put the target temperature in autofan at 50ºC, so my Gigabyte card are now running with only 55mh/s.
There’s a way to disable autofun for only one gpu? Or another trick?
I’m using phoenixminer.
Thank you,
William
Usually if you set the value at 0 it equals AutoFan
i tried disable the autofan ant i put in the PhoenixMiner these arguments: -tt *:50,4:65
Where i wanted all the GPUS gets 50ºC as the target temperature except the 4 (my Gigabyte) that would take 65ºC.
But not worked…it’s still in 50ºC
Bumping this.
Is there a plan to set Autofan for individual GPUs.
One card likes to be a bit cooler than the others but with autofan I end up spinning all card fans faster, creating more heat in the surrounding and negating the cooling effect (it’s like a positive feedback loop where the balance of temp spirals up and all fans start to spin faster)
Am also trying to figure this out at the moment.
Have a mixed rig but want my NVIDIA cards to be at a static speed
Hey there any updates? I’m also struggling with this issue in the rig with 3070 and one 3080
Yes Please exact same issue.
any solution? The same thing happens to me with a card, the fan needs to be 100% or lower the hashrate, I need to isolate that card from the autofan please
