Things are crazy, profits are almost gone and to make it worse everything changes every moment
Had an idea if it is possible to dual mine spec coins (ie everything now lol). Don’t want to do etc, since it will be out of reach for gpu miners, and don’t want to do ethw.
For instance that trm allows some unusual combos. Don’t you wish you had more amd cards? lol SRBminer is another but never used it but for cpu. Not sure how it works for dual mining
I know an alternative would be to mine one on one card and another coin on a different coin. Just thought it might be an interesting option. I like the way lolminer handles dual mining with dualfactor or t-rex with dual-algo-mode. You can just assign a small percentage of capacity to the second coin
Hello, do you have a solution?
I also tried several parameters, I speak only for HiveOs not windows,
the ZIL works on Teamredminer on all pools with the parameter --Zil … --Zil end and also activate the dag…
for Bzminer it complicates for pools, the parameters are not accepted by Hiveos: activation of Dag OK
“cache_dag”: 1
the settings:
“algo”: zil
“a2”: zil
“w2”: xxxx
“p2”: is not accepted by HiveOs
here is my problem P2 thank you for your help
I speak with HiveO Flight sheet only
because live via terminal it works very well but a lot of loss of information… thank you
There really is no point dual mining two core heavy algorithms on the same card. If you want to mine both, you better split your cards so one card mines Kaspa and the other mines Radiant.
But, whatever floats your boat I guess…
kas + rxd isn’t listed in the bz site. As @aminer says, you don’t usually mine two algorithms that are heavy on the same. Eth and kas work because one targets the memory and the other the core.
If you still want to try they gave you the info in their video. Hive doesn’t consider them a valid pair, so you could try adding the extra parameters in the extra config arguments. However you might get better results mining on 2 different cards as aminer said
They say to use -a kaspa -p stratum+tcp://pool.sg.woolypooly.com:3112 -w $wallet.$rigName --a2 radiant --p2 stratum+tcp://pool.us.woolypooly.com:3122 --w2 1Jxas3fNsdxuua8f5RFmGDSyupM5S5n6fM.$rigName --max_dual_autotune_drop 0.92 --oc_lock_memory_clock 810
You need to convert the options to json like format (“name”: “value”)
it could also be dependent on the next release 12.2
that didn’t work lol Not sure if you need 12.2, since I upgraded thinking that might fix it. The solution below might work with the current stable release
bz has a trick to force it to mine different coins than whatever the config states.
You need to use this in the extra config arguments
"force_algo": "kaspa"
"force_algo2": "radiant"
After that you select Ethw, Etc or Ergo as your main coin in the flightsheet. Don’t worry you will override that in the config. Then for the second coin in the flightsheet set your rxd data.
After you do that, press the setup miner config label for bz
As for speed I’m getting 264.8 kH for kas and 126.3 kH for rxd. Used to get 372 kH on kas with 60W (about the same power both times). You could increase the power and thus get higher hashrates
