I am having trouble with my mining rig. The GA 104 sign for a Gpu constantly pops up on Hive. The cards are two mounts old ( 6 x RTX 3070 gaming ), and I have no idea what went wrong.If I put only one card into the rig the problem still occurs.
I changed the motherboard for a brand new one
Bios setup✅
New risers
New wiring
The only things that I haven’t changed are the PSU,CPU and the GPU
Overclock Mem 1100 Core 2100
Can you recommend to me what else can I do??
I tested every card. I put them into another rig ( exactly the same setup ), and it run well.
I have attached a GPU to the motherboard, and it runs well at the moment with one GPU. I updated hive to the latest version to the 703, and the driver is 465.31. After these updates, I tried with a new riser, and the problem occurred again. I checked my bios settings, but I could not find anything wrong.
Max link speed= Auto
Above 4G memory= Enabled
The rig was running well for two months, but now somehow, he doesn’t like the risers.
Is there anything that I can set in Hive, also where can I find the Linux kernel version?
You are going to want to set your link speeds to GEN2. If it does auto it will listen to the card for the speed. GEN3 is spotty at best and GEN4 straight doesn’t work. Start there and see how that goes, it might just work since the riser itself probably doesn’t support GEN3 or 4.
In the screen shot here you can see the kernel in the very bottom right
