Hello everyone,
I’m a begginner miner. I tried to setup eveything correctly but i assume there is a problem in my system.
I have Gigabyte RTX 3080 Gaming OC V1 but i couldn’t reach the average hashrate. 12~16 MH/s is what i get right now.
Here is my overclock settings
Core Clock Offset: -200MHz
Memory Clock: 2000MHz
Power Limit: 230W
When mining is on GPU temp is 80~82C and power is 130~140W, I assume these numbers are in average but hashrate is quite low I couldn’t pass 16 MH/s. I’ve already tried picking another pool and miner but it didn’t work.
Actually, i fixed what i found in the internet like 4G decoding and tried to pick Auto or Gen1 for PCI Express. Don’t know if there is anything else i can do.
yes use TREX.
I have several 3080 . i think they are better than yours tho. (Founders edition?)
these settings work for me
Core 1030 (Use an absolute setting like mine do NOT use a relative negative setting)
MEM 1800 (your 2000 is definitely too high)
PL 0/zero
FAN - set it to 100% for now, keep the temp below 70 degrees.
produces 96.89MH per card…slightly variable depending on temp
if my settings do not work then you need to lower MEM and CORE. I think you will find that MEM is more important to keep as high as poss for ETH mining.
I spent a LONG time trying to clock mine up higher. I could get higher rates but something always crashed. These setting keep mine running non stop all day…that’s what you want.
For anyone interested, i solved my problem it was thermal throttling. I’ve just changed thermal paste and I tightened the screws well. Thats all thanks for help!