Hello
I have a problem with my rx 580 includes memory Samsung K4G80325FC115-D009PI5-100.
It has automatic bios mod (1click) with polaris, but it doesn’t work well.
Currently I have it with OC and everything is “fine” but after a short time (hours or a day) it goes crazy and throws up to 50 invalid shares in a short time and drives the whole miner crazy.
Could you help me with some mod bios or a way to stabilize it.
place it in a riser with direct pcie connection from the power source.
I tried it with OC and without OC but the problem is the same.
I add the link of my bios without mod and with mod.
one click should be ok. what you can do is remove the DPM state that you have inserted and also put memory controler voltage 800 and also switch on the aggressive undervolting on. the other settings seem ok.
How many MH the card is doing with the original bios, core clock 1145, core state 1, core voltage 825, memory clock 2050, mem state 1 and amdmemtweak --REF 20 ? If is around 30 MH work from there and forget the polaris one click patch. I have two cards which doesn’t work well with the 1 click patch, looks like the amdmemtweak do close as good as the patch for them.
Hello
I appreciate all of your responses.
Indeed, it had no VDDCI set
so it marked errors.
I have 2 days with this modification and it gives me 1 or maximum two invalid shares a day, it decreased a lot.
My vddci is 800. Remove your dpm states. I got some invalid shares after hours of work due to wrong straps flashed with bios mode but i fixed it after flashing the correct ones and OC woth correct settings.
well i did 29.29 MHs with REF 200 and stock bios. i used REF 20 and 30 but got only 29 MHs. With bios mod i do 30.82 now with REF 20 or 30. My GPU is bad but still there is a difference.
polaris bios editor. you should download the original bios, then open it with polaris bios editor and hit the one click timings fix and save it with different name. keep the original file just in case.
flash the modded bios back and OC.
Well, I have that dual rx 580 asus samsung memory that usually gives problems, in one day its invalid shares shoot, others only 2 or 3 and other days none.
The latter I think happen less often.
It is strange because the same oc and bios mod I use it with another 2 rx 580 and they do not mark any error, they are perfect.
The problem is that even if they have the original bios it marks a few invalid.
I begin to suspect that the problem could be in the change of thermal paste or the pads.
Any ideas?
With biosmod it reaches 31 mhs. but it becomes unstable with or without OC.
Right now I tried the factory bio. So far it does not mark me error or invalid but it gives me 25 and 27.8 with mod.
I do the biosmod with polaris one click.
any solution that you recommend?
and stock bios. i used REF 20 and 30 but got only 29 MHs. With bios mod i do 30.82 now with REF 20 or 30. My GPU is bad but still there is a difference.