Hello all! First post here, please let me know f should be posting any different.
I have an AsRock B450 Pro 4 that I Am using as a basis for a new mining rig. I started with a single MSI RX 580 8gb, and recently acquired another one, identical to the first.
I installed it in the second PCI Express Slot, booted into HiveOS, and it didn’t recognize the GPU. Here’s what I’ve done, and what I’ve tried. I can’t seem to get it to work
++HiveOS Side++
-Created new USB Installation with New USB Drive
-Re-Created workers
-Rebooted Umpteenth Times
++BIOS Side++
-I’ve enabled Above 4G Encoding
-I’ve disabled CSM
-I don’t see a way to set my PCI to GEN 2, but I set it to 4x4x4x4 instead of 16x
-Reset Bios to factory Settings, re set up again
-HIVEOS Boots and is stable mining on the single GPU, with the second one not appearing anywhere in the system.
++Hardware++
-Card verify working in other systems, and first slot of this one (Stress Tested and passed)
-Card Turns on, Fans Spin, Lights come on
-Off of a single 600w EVGA 80+ Bronze PSU
-The PCI Power is off a single PCI Cable from the PSU. This was split from the factory into 2 (6+2) power connectors.
Any help would be appreciated. I don’t know what else to try. I know the card works 100%.
Thank You!