I noticed a couple of days ago low speeds on 2miners. The pool indicated much lower speeds than what hive reported. 2miners stated an average of 9 to 22 for a 40 Mh/s card. Only had one card mining with them.
Also, shares compared to other pools were much lower. lolminer was reporting 4 on 2miners, while the other pools showed 25 for the same period.
What throws me off is that miningpoolsprofits.com shows no blocks for 2miners. They even removed them from the listing. While on the other hand 2miners is showing that they are mining blocks.
So is this something that only affects some people? Thought it might had been eth test (turning mining off), but the other pools are working fine
What card are you using? Share count in the miner will vary from pool to pool depending on the pools/servers difficulty ( look up vardiff on google if you want to learn more)
Thanks. I gave 2miners another try and things are looking better. They have an average hr close to the card’s speed.
The number of shares between the two pools doesn’t compare, as you pointed out because of vardiff. However, it is now only half instead of a sixth of the shares. Guess there was a problem and must have been fixed by now.
Though I should be rather low on the difficulty range because of my hashrate (44 on 2miners). Have more cards running on flexpool than on 2miners, so that should had made the vardiff on flexpool harder.
Even set up another instance of lolminer to reduce that variability. Could be that there is something wrong with the config for the miner lol
2miners
---------------------------------------------
Statistics (13:55:49); Uptime: 2h 54m 2s
The api is active on port 44445
Algorithm 1: Ethash
Connected to: eth.2miners.com:12020 (86ms latency)
Algorithm 2: SHA256-TON
Connected to: https://next.ton-pool.com:443 (104ms latency)
Name Speed Pool Shares Best Eff. Speed Pool Shares
Mh/s Mh/s A/S/Hw Share Mh/s/W Mh/s Mh/s A/S/Hw
GPU 8 RTX 3060 Ti 43.94 36.77 44/0/0 457.1G 0.342 1022.05 954.25 145/0/0
---------------------------
Total 43.94 36.77 44/0/0 457.1G 0.342 1022.05 954.25 145/0/0
Best Eff. Power CCLK MCLK Core Junc Fan LHR
Share Mh/s/W W MHz MHz Temp Temp Pct Pct
GPU 8 3.7T 7.955 128.0 1230 7920 63 75 63 80.9
---------------------------
Total 3.7T 7.955 128.0
---------------------------------------------
Ethash: Average speed (10s): 43.94 Mh/s
SHA256-TON: Average speed (10s): 1022.18 Mh/s
flexpool
---------------------------------------------
Statistics (13:55:52); Uptime: 2h 54m 3s
The api is active on port 44444
Algorithm 1: Ethash
Connected to: eth-us-west.flexpool.io:4444 (36ms latency)
Algorithm 2: SHA256-TON
Connected to: https://next.ton-pool.com:443 (93ms latency)
Name Speed Pool Shares Best Eff. Speed Pool Shares
Mh/s Mh/s A/S/Hw Share Mh/s/W Mh/s Mh/s A/S/Hw
GPU 0 RTX 3060 Ti 40.80 34.86 91/0/0 337.3G 0.328 971.65 927.84 141/0/0
GPU 1 RTX 3060 35.80 33.32 87/0/0 955.0G 0.319 807.18 769.91 117/0/0
GPU 2 RTX 3060 36.19 36.77 96/0/0 632.2G 0.301 780.46 789.65 120/0/0
GPU 3 RX 6700XT 45.94 39.45 103/0/0 334.1G 0.484 551.29 598.82 91/0/0
---------------------------
Total 158.73 144.40 377/0/0 955.0G 0.351 3110.58 3086.22 469/0/0
Best Eff. Power CCLK MCLK Core Junc Mem Fan LHR
Share Mh/s/W W MHz MHz Temp Temp Temp Pct Pct
GPU 0 5.9T 7.804 124.0 1110 7920 63 76 N/A 67 83.5
GPU 1 32.5T 7.194 111.7 1350 8400 62 70 N/A 56 79.9
GPU 2 5.1T 6.491 119.7 1380 8400 61 69 N/A 41 79.5
GPU 3 8.9T 5.813 94.3 1210 1069 45 51 66 33 FHR
---------------------------
Total 32.5T 6.885 449.8
---------------------------------------------
Ethash: Average speed (10s): 40.80 Mh/s | 35.80 Mh/s | 36.19 Mh/s | 46.00 Mh/s Total: 158.80 Mh/s
SHA256-TON: Average speed (10s): 971.77 Mh/s | 807.15 Mh/s | 780.49 Mh/s | 552.02 Mh/s Total: 3111.42 Mh/s
Thought it might had been eth test (turning mining off), but the other pools are working fine