Mining Eth-Ton using Teamredminer R-mode with 5700xt / Vega 56/64

[afargo]

I wanted to start a discussion about mining Eth+Ton with Teamredminer R-mode (I have --dual_intensity set to 0.5). I have 6 rigs with 8 GPUs each: 11x Vega 56 (Hynix), 2x Vega 56 (Samsung), 14x Vega 64 (flashed to Vega 56), 6x 5700xt (Samsung), and 14x 5700xt (Micron). I’ve been able to lower my power consumption considerably using R-mode (which has also reduced my Ton hashrate), and am hoping others will post their settings and results.

All of my 5700xts are flashed with a modified bios following this guide:

Rx 5700 xt - 58.4MH/s 95w

Step 1: Save your bios Step 2: Download a bios from https://www.techpowerup.com/vgabios/?architecture=&manufacturer=&model=RX+5700&interface=&memType=&memSize=&since= for a RX5700 even if the version doesn’t match. I had a rx 5700 xt pulse so got the bios for rx 5700 pulse (No XT). yes a RX5700 bios for your RX 5700XT… Step 3: in my case my bios version was not compatible so I open the bios in HXD and replaced the bios version to 068 [image] Step 4: Under VRAM Timings, click on memory t…

My Vegas use with the following straps (I’ve increased RC to 37 on most of my GPUs and have also increased RCDRD to 13 on a couple of my GPUs):
amdmemtweak --CL 20 --RC 36 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12

I’ve attached a screenshot with my oc settings, the low and high end of my hashrates and power usage, and my average hashrates and power usage for each type of GPU.