Missing unit after update (next BUG)

Hello
recently i had issues with the latest update of Hive Os, it was the power off problem with no reason and some technical issues, that was solved automatically idk how! but now I’m scared about the BRICK form of the AMD cards in my rig!
i have 14 GPU AMD, after the OC on GPU 8 the system hung up and tried to restart the rig, after the rebooting the GPU 13 - this GPU was connected through DVI-D Port to my monitor for more than 1 month (used the DVI-D to VGA convertor then used 3 meter VGA cable to connect to monitor), it has no problem before this update and recently after the OC enabled on GPU 8, the GPU 13 refused to send Output signals to the monitor, at first i though it was the connector problem, then checked that step by step and recognized that was not the VGA or DVI-D port or cable problem - because tried to use another GPU and everything was OK - then changed the GPU USB cable (new one) not worked, changed the PCI-E connector, not worked and at the end changed the whole riser package with a new one riser pack and not worked again, used another healthy GPU riser - that was in the circle and worked correctly by that riser - not worked too!
tried to test it on windows 10 by another MB, not worked also with PCI 16X! changed the ports with another PCI and risers, not detected in windows 10, deleted the old AMD drivers by DDU in safe mode, tried to connect the GPU in windows 10, but again not detected and there was error 173 when tried to install AMD driver on windows 10…
tried to search in topics everywhere and some one wrote in there: IT IS BRICK NOW!
hollllyyy sh!t is it possible it just bricked!!! i cant blv it that it is brick now and why it should be something like this!!! i didnt even moded the bios on that GPU! just the regular OC!

the physical tests:
the LEDs are working correctly
the Power 8 Pin and the connector was okay
the fans are regularly spinning like other normal cards in rig or pc

but theres nothing in Device manager in windows 10 (also in hidden devices)

please the Admin, if it is dangerous for us, warn us to downgrade or dont use this version of Hive…

any recommendation would be helpful guys. thanks :white_heart:

Find out the meddling in the subject intended for admins, but you tested it on windows and your card did not give video was that it?

Could it be that you were not awarded and ended up with a hardware defect which is common to happen after a long time of use?

How long have you been with these plates working at full throttle?

thanks for reply, yes tested on 3 platforms. Windows, OSX and Linux (Ubuntu, Fedora and HiveOS)… no output. i used that like fragile cup with temp 20 C - 60 C , High Quality PSU cables and risers. the usage time is exact 45 days. other GPUs (exact same models) are working like a charm but this one even not showing in lspci section! but fans are spinning smoothly… i think it’s dead and tried to figure out how to fix it in HW ways and found this one:

1 Like

Sadly, under the stress of mining, cards can die prematurely. Your chances of reviving it are slim.

That tutorial is for reviving cards from a bad bios flash… not from overclocking it to death.

You didn’t BRICK the card… you KILLED it… there’s a difference.

BRICKED means the card is otherwise fine, but can’t initialize due to the BIOS being corrupt, missing, or wrong (for the card).

KILLED means it was overclocked until something broke and now the card is completely dead. It could have a dead GPU chip, dead RAM, or a dead voltage regulator. None of these things can be fixed by a lay-person.

If you’re lucky, the failure was caused by a loose solder joint… you can try baking it in the oven (see a tutorial)… but the success rate is poor, at best.

Good luck fixing it.

1 Like

Thanks for your Sincere answer, I’ll try the tuts and update this topic.

Oh it’s good to reply here but it’s old, just wanna tell you i tried to fix that after some days and 8+1 methods fixed the card! It still works.

This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.