I have 3 Radeon RX 570 8GB cards. Two of them pulls out over 31 Mh/s hashrate. But the MSI Radeon RX 570 8GN with SK Hynix Ram only gets 24Mh/s. Tried a bunch of different settings ( e.g., popular pre-settings, manually tweaking some of the settings) without success. The hashrate stays around 20-24 MH/s. The best is about 24 MH/s.
Anyone has similar experience or suggestions? It is for ETH mining.
I have RX580s 8gb and the only way I got there hashrates up was via modding the bios and then adjusting the clock rates. Another point worth mentioning is that the hashrate will differ by card, memory and by manufacuturer. I have Asus, asrock, MSI and Ice amd 580s and they all perform differently in terms of power consumption and hashrate. (msi does core consumption of 79 whereas the asus duals are pushing 95-100). Good luck and don’t expect to get the same performance I say.
I had a similar problem to you though, I think maybe you havent modded it properly. Make sure you are using the right bios or try different bioses (preserve your original) to see if that solves the problem. I think it could be a matter of trial and error. Try to see how your card behaves with different settings in windows and you might see your card jumping all over the place in the undervolt settings. If this is the case, you will know there is either something wrong wtih the bios or it is just a limitation of the card. I could be wrong though if anybody knows better they could enlighten me this is just based on my experience.
I understand that each card is different and may require its own tweaking.
However, since in HiveOS we can setting the CORE/VDD/MEME easily, is it still necessary to do bios mod? Are they doing the same thing?
Try to change OC settings, i use these, stable.
All 570´s are vbios patched memory timings, there is no big difference compared to factory amd drivers
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.
