You should improve more the OC. I am with Asrock RX 570 8GB Samsung and with my OC i get 97W and 29.16 MHs. 51 degrees C Temp and 47% cooling. your cooler is at 100% and 100W to get almost the same MHs.
my Core clock is 1165, Core Voltage 850, VDCCI memory controller voltage 800, Memory clock 2180, Memory voltage 800, Fan speed 50%, Switched on Aggressive undervolting, amdmemtweak --REF 200 setting.
Sorry i dont have. My card is not bios modded. What you can do is get your bios directly from your card. This is done in hive os flash bios tab. You have an option to backup your current bios. Then open it with polaris bios editor, and then one click timings fix and then flash it back but keep the stocked backed up somewhere. I didnt want to mod the bios because it voids warranty. I currently make 29.29mh/s
Hi, it’s my first time posting here.
I have a RX 570 MSI Armor 8gb. Initially i was doing about 20.5 MH/s. After I downloaded the vbios in techpowerup site (link: VGA Bios Collection | TechPowerUp) my card’s doing 28.45 MH/s without bios mod from polaris (when i make bios mod the card does not work i don’t know why), but it’s a good value
Dude, you never download bios from other sites unless its absolutely needed. What you needed to do i save your stock bios by extracting it from your GPU directly. Thats easily done from the overclock tab in Hive os , there is a download vbios button. you save it in your computer and then with polaris oneclick you modify and save it under other name so you can have both original stock bios and modified one. You flash the modified bios then. keep in mind that you need to stop miner and card should be working when you upload new bios.
I have a similar card , Asrock but with the same samsung memory. i moded my bios recently and used it. with settings 1112 core clock , 825 VDD, 800 VDDCI and 2100 Memory clock it doesn 30.17 MH/s with 90 Watts. I guess my GPU is a bit worse than yours since it consumes more power but you should be getting more or less the same.
I used polaris correctly (i bios modded my rx580 and went ok) but my rx 570 simply does not start when I upload the modded bios. I tried version 1.7.5 and 1.7.4, uber mix 3.1, 3.2, 3.3, does not work. After it I just gave up
Are you using the same oc settings ? After bios mod you should start over. Lower the mem to 2000. After i moded with one bios i couldnt go over 2000. Depends on the mod you did. Remove the oc and start low and raise just a little at a time
I modded the bios and it worked without any overclock, but i can go just up to 1750mhz memory clock, 26.5 MH/s. When I put 2000 shows the message GPU dead. It is not working for me
Hi, I forgot to reply, I found an old printscreen with the factory BIOS and discovered that my memory is Hynix. Then I got the right BIOS and I did the mod, look the actual performance:
