Nope, 3070 Ti is power hungry…
Theres no special settings.
OC is at picture and NBminer LHR unlock just works 
Thanks for reply I will try those hope will work for me as well.
That’s an LHR 3080, no way. Show me the box ot came out of.
Do me a favor
Go to 1080 core and 2150 memory. I want to see if you get 99 mh.
Which evga. ftw3 or xc?
It seems to me NBMiner is slower to the payout compared to gminer or lolminer even with the faster LHR hashrates.
Miners dont payout, the pools do.
Hello, I am a newbie with mining. i have setyup mining with a 3070 and 3060ti LHR. currently i am getting 59, 38 MH with lhr 68 settings(default) on nbminer.
where can i modify the value of lhr in hiveOs, is it in flightsheet data or OC settings
1 Like
Miner config/ extra arguments:
“lhr” : “68”
1 Like
I’ve tried using nbminer and my lhr v1 cards “nerfed” will not get over 26 mh/s. What driver is everyone using?
460.91.03
3060ti lhr 38-41mh
3070 lhr 42mh
What setting do u use
1 Like
I’ve tried every drive in the book and cannot get them to work on nbminer. Currently using lolminer, 460.39 getting 37.5 mh/s on my 2 3060 v1 lhr cards
I also get this error when adding the lhr setting
That’s what I thought.
You’re right, 3070 ti is power hog but i was able to reduce the 185 watt and keeping it around 54-55 mh/s.
I think your issue is memory throttling. Basically when your gpus get hot it will underperform. I see this happens to my cards during the afternoon on a hot day and at night and morning, they’re full speed. Also, you may want to use absolute core setting instead of offset value. I find it a bit more stable. Here are some of mine settings. Note 3080 & 1660 are mining ETH… The rest are mining ERGO
Searching for some stable OC’s for my 3060 LHR2 cards (device ID 2504) on ETH… Tried almost everything in this thread after 3-13 hours they just get GPU lost and cause the rig to freeze/reboot. I have some nice working settings for my 3080 LHR2 but these 3060s are driving me up the wall
nbminer 39.2
I tried miniz it has great hash rate but not stable and crashes <12 hours.
I have two LHR v2 3060s (gigabyte and evga) on nbminer 39.2. Was getting ~28 MH/s with absolute core clock. Changed to -502 core 2000 mem and am getting ~33 MH/s. Key was changing to offset rather than absolute core value. I can’t explain why, but that’s what works for me. They’ve been running for days uninterrupted.
Don
I wouldn’t use absolute core for Ergo, it needs more power than most people think, its not Eth. I’d do -502 core instead of maxing out absolute core clock. Then adjust power and memory.
3070s -502, 125 power limit and 2600 mem. Youll get 172 MH at 125 watts. 2600 mem is perfectly fine, 3070s don’t run high mem temps.
3080s I do 180 power limit and i get 212 mh at 180 watts.
Mem at 2150 -502 core
1 Like