New GMiner v2.71 LHR unlock update - Is it better then NBMiner v39.7?

Nvidia Cards
1

Hello guys. Today, a new update for GMiner arrived.

  • VER 2.71
  • Improved LHR performance, added two modes (–lhr_mode): 0 - energy save mode, 1 - maximal performance mode (default).
    Miner display LHR unlock percentage in statistics table (LHR row), you can adjust it by --lhr_tune option.
    Now --lhr_tune meaning GPU unlock percentage, for compatibility lhr tunes below 10 mapped to new default values.
    If LHR auto-tune (–lhr_autotune) enabled miner tries increase LHR unlock percentage while mining.
  • Improved RavenCoin performance, fixed floating hashrate
  • Display maximum difficulty of shares for each GPU

This is my results:

With --lhr_mode 1 (performance mode), I get almost the same hashrates - 73% GMiner LHR unlock vs 74% NBMiner LHR unlock - and the same power draw of NBMiner. (drawing 1185-1200w from the wall - 8 3060TI LHR - 352MH/s)

But, what is interesting is that when I use with --lhr_mode 0 (energy saving mode), I get a reduction of almost 200-250w from the wall. Ranging from 850w to 980w. But, I lose 15~20MH/s (332-335MH/s) when energy saving is activated.

Energy saving mode: 950w / 335mh/s = 2.8w per hashrate
Perfomance mode (or NBMiner aswell): 1200w / 350mh/s = 3.4w per hashrate

I think I will stick with NBMiner for now, but the future is promissing guys.

Have anyone tried GMiner with the new update?

4 Likes
2

I gained 2 MH on a 3060 V1 LHR.
That is the only thing I see so far.

And --lhr_mode 1 is default you shouldn’t even have to add that command.

1 Like
3

The result slightly better than nbminer on my 3070 ti. So compared on dev fee, gminer to most choice now.
image

1 Like
4

Hi!! I’m a noob miner… Can u post your oc for last GMiner please? I have Gigabyte rtx 3060 ti but I can’t reach a better hashrate than Nbminer… Tnx

5

I just updated to the new GMiner 2.71. Improvement from 58,2 to 59.83 MH/s on my 3070ti. sometimes it even hits +60. I added --lhr_autotune to the flightsheet. LHR is know set to 73.5

image
image1212×467 36.5 KB

1 Like
6

I have Gigabyte rtx 3060 ti gaming oc core - 502 mem 2900 pl 130 driver 470.74 last hiveos with nbminer reach 46.7 stable… With gminer can’t reach this… Suggestions??

1 Like
7

Stick with NBMiner I think… Also, you can try removing PL or 145 PL. 130 is too low I think.

1 Like
8

I used the same OC for NBMiner to GMiner…

9

try core clock +1400 en power limit on 0

10

What oc use you?

11

What memory brand your GPU have?

12

Samsung. I have 2 gigabyte rtx 3060 ti same for each

13

Try using core 1425 / mem 2600 with no PL. If it’s stable, you can try even more, like 1500 / 2700, or 1550 / 2800. Don’t use PL.

1 Like
14

Ok tnx now I’ll try

15

Just testing the latest trex. Looks promising

image
image1170×763 185 KB

image
image1170×2532 227 KB

16

The autotune on my is bringing the % down to 62% and lower and still not stable. 3080ti.
Any suggestions?

I cannot seem to get stability on NBMiner either

17

I tried it and can’t get more than 34-35 on my V1 3060 using gminer. On lolminer with the 460.39 drivers I’m getting 39.

19

Which nvidia driver are you using?

20

has anyone gotten dual mining to work on gminer? I get this error

unknown argument "--dserver"
21

image
image735×806 34.1 KB

it’s ok for 3060 v2 lhr ?