OC settings only applies on first GPU

Nvidia Cards
1

Hi,
I am facing a strange issue on my HiveOS rig, when I’m trying to apply OC settings I’m getting the following errors:

Mon Jun 21 07:19:04 EEST 2021

Detected 6 NVIDIA cards

GPU BUS ID : 10 12 21 23 24 25
CLOCK :
MEM :
PLIMIT :
FAN :

=== GPU 0, 10:00.0 GeForce RTX 3060 12050 MB, PL: 100 W, 170 W, 170 W === 07:19:04
SET CLOCKS: 0 MHz
SET POWER LIMIT: 170.0 W
Max Perf mode: 4 (auto)
Attribute ‘GPUGraphicsClockOffset’ was already set to 0
Attribute ‘GPUMemoryTransferRateOffset’ was already set to 0
Attribute ‘GPUFanControlState’ (R01:0[gpu:0]) assigned value 0.

=== GPU 1, 12:00.0 GeForce RTX 3060 12053 MB, PL: 100 W, 170 W, 170 W === 07:19:04
SET CLOCKS: 0 MHz
SET POWER LIMIT: 170.0 W
Max Perf mode: 4
Attribute ‘GPUMemoryTransferRateOffset’ was already set to 0
ERROR: Error resolving target specification ‘gpu:1’ (No targets match
target specification), specified in assignment
‘[gpu:1]/GPUPowerMizerMode=1’.
(exitcode=100)

=== GPU 2, 21:00.0 GeForce RTX 3060 12053 MB, PL: 100 W, 170 W, 170 W === 07:19:04
SET CLOCKS: 0 MHz
SET POWER LIMIT: 170.0 W
Max Perf mode: 4
Attribute ‘GPUMemoryTransferRateOffset’ was already set to 0
ERROR: Error resolving target specification ‘gpu:2’ (No targets match
target specification), specified in assignment
‘[gpu:2]/GPUPowerMizerMode=1’.
(exitcode=100)

=== GPU 3, 23:00.0 GeForce RTX 3060 12053 MB, PL: 100 W, 170 W, 170 W === 07:19:04
SET CLOCKS: 0 MHz
SET POWER LIMIT: 170.0 W
Max Perf mode: 4
Attribute ‘GPUMemoryTransferRateOffset’ was already set to 0
ERROR: Error resolving target specification ‘gpu:3’ (No targets match
target specification), specified in assignment
‘[gpu:3]/GPUPowerMizerMode=1’.
(exitcode=100)

=== GPU 4, 24:00.0 GeForce RTX 3060 12053 MB, PL: 100 W, 170 W, 170 W === 07:19:04
SET CLOCKS: 0 MHz
SET POWER LIMIT: 170.0 W
Max Perf mode: 4
Attribute ‘GPUMemoryTransferRateOffset’ was already set to 0
ERROR: Error resolving target specification ‘gpu:4’ (No targets match
target specification), specified in assignment
‘[gpu:4]/GPUPowerMizerMode=1’.
(exitcode=100)

=== GPU 5, 25:00.0 GeForce RTX 3060 12053 MB, PL: 100 W, 170 W, 170 W === 07:19:04
SET CLOCKS: 0 MHz
SET POWER LIMIT: 170.0 W
Max Perf mode: 4
Attribute ‘GPUMemoryTransferRateOffset’ was already set to 0
ERROR: Error resolving target specification ‘gpu:5’ (No targets match
target specification), specified in assignment
‘[gpu:5]/GPUPowerMizerMode=1’.
(exitcode=100)

Did a couple of reinstalls, reboots, tested with several drivers and still the same result: OC setting only applies of the first GPU (gpu:0).

Any advice?
Thanks!

2

Did you ever figure this out? having a similar issue. 3 cards work, 1 won’t.

3

Hi @Selomine,

I have managed to solve my problem by removing HDMI dummies from GPU’s, after that everything worked like a charm. However I noticed that it doesn’t make any difference in hash rate even if you plug or unplug the HDMI dummies.

4

This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.