Radeon Pro WX9100 Hashrate

[MichaelSun]

Recently got a Radeon Pro WX9100 for my Mac.

It should have the same hashrate as Vega 64 FE.

However, I couldn’t find any WX9100 hash rate report so I decided to test it for one day just for fun and share the result here:

FYI, I got 50.5 MH/S.

[azogtoth]

Looks too good to be true: 50MHs at only 131 W? What miner are you using with what settings? With teamredminer I’m getting 36.3MHs at 170W

[MichaelSun]

@azogtoth

Looks too good to be true: 50MHs at only 131 W? What miner are you using with what settings? With teamredminer I’m getting 36.3MHs at 170W

If I were you looking for help, I wouldn’t question other’s result like “too good to be true”

You can’t get it doesn’t mean it is not true.

The WX9100 is almost as same as the Vega FE.

I was using both team red and Phoenix Miner.
Miners won’t effect the hashrate that much. The problem is your settings.

Please check this: What's Your AMD Vega FE Settings? HashRate?

Here is the setting I was using: amdmemtweak --i 3 --CL 19 --RAS 28 --RCDRD 12 --RCDWR 10 --RC 44 --RP 14 --RRDS 3 --RRDL 5 --WR 15 --RRDSD 3 --REF 17500 --RFC 300

As I can see from your screenshot, you barely set anything.
You didn’t even set the power limit, you still have a lot of basic things to learn.

[azogtoth]

Briljant, you caught me there! Indeed I’m very new to this and was under the impression that the pro-lineup of AMD couldn’t be overclocked

Trying your settings immediately boosted the hashrate, but my temps and power are a lot higher than yours. No clue why, all help appreciated, but I will scour more of the forums here

[farkeytron]

If you look at his screenshot, he also manually set the voltages and clocks.

You don’t show any manual settings in your screenshot.

[MichaelSun]

@azogtoth

Briljant, you caught me there! Indeed I’m very new to this and was under the impression that the pro-lineup of AMD couldn’t be overclocked

Trying your settings immediately boosted the hashrate, but my temps and power are a lot higher than yours. No clue why, all help appreciated, but I will scour more of the forums here

Sorry, I was too rude, harsh and mean.

Here is my OC setting

[azogtoth]

Thanks Michael, don’t worry: I didnt find your response harsh, but spot on and justified! It is an amazing new world to me. Changing the settings did indeed lower the power a lot!

Do I need to run the amdmemtweak too? I’ll give it a rest for today. I hope this thread is helpfull for more newbees like me.

[MichaelSun]

@azogtoth

Do I need to run the amdmemtweak too? I’ll give it a rest for today. I hope this thread is helpfull for more newbees like me.

Yes, you need run the amdmemtweak every time after boot up.

Be aware that
amdmemtweak --i 3 --CL 19 --RAS 28 --RCDRD 12 --RCDWR 10 --RC 44 --RP 14 --RRDS 3 --RRDL 5 --WR 15 --RRDSD 3 --REF 17500 --RFC 300

“–i 3” means gpu number 3 which is the WX9100 in my rig.

Yours should be amdmemtweak --i 0,1 --CL 19 --RAS 28 --RCDRD 12 --RCDWR 10 --RC 44 --RP 14 --RRDS 3 --RRDL 5 --WR 15 --RRDSD 3 --REF 17500 --RFC 300

[arwaseemaffidi]

which motherboard are you using ? Because my mining board cannot detect it. only my gaming pc board Z390E can detect it.

[arwaseemaffidi]

and my memory Temperature is 80+ at this stage ? what should do ?

[arwaseemaffidi]

Hey dude. can yo uplease share your amdtweak settings. because it says Invalid perameters

[0mida]

There is no RRDSD option. Might be a typo? Maybe RRDL , RRDS or RRD only?
amdmemtweak --help |grep RR
–RRDS|–rrds [value]
–RRDL|–rrdl [value]
–RREFD|–rrefd [value]
–WRRD|–wrrd [value]
–RRD|–rrd [value]
–RRDL|–rrdl [value]
–RRD|–rrd [value]

[developeralgo]

I know its been a while but Michael can you post the Radeon Pro WX9100 vbios rom file version 113-D0510100-106 , The one on Techpowerup is corrupt its only 60 KB while the file should be around 256 KB.