Hello, My Rig has 6 GPU’s but only shows 5. New problem, was working fine previously.
Fixes I have tried.
- Upgrade Nvidia Drivers
- Upgraded Hive OS
- Downgraded Hive OS
- Switching card positions
- Replacing the card that didn’t show up.
Nothing has helped and I can only get 5 of 6 Gpu’s to show up now. Any Ideas will be appreciated.
Here are my specs/settings
Versions - Latest
OS 0.6-213@220222 Nvidia Drivers 495.46
Motherboard Asus CometLake-S GT2 [UHD Graphics 630] v 2.21.1278
CPU Intel i5-10400 @ 2.9 ghz
8 gigs ram
250gig SSD
CPU Parameters
- Above 4g Decoding = Enabled
- Primary Display = CPU Graphics
- PCIEX16_1 Link Speed = Gen2
- PCI Express Clock Gating = Disabled
-
Launch CSM = Disabled
- PCIe Speed = Gen 2
I included a picture of some of the more obscure settings.
Are you using a pcie splitter? Are you sure your board works with 6?
Not using a splitter. I had 6 working for about a month.
and every slot works? every riser? every cable? every gpu?
Every GPU works, I will check each slot and riser independently
Finished checking every gpu, riser, and cable. They all work just not when all 6 are plugged in.
Yes, every slot works fine. I suspect the motherboard bios is set wrong but I have been over it multiple times.
SOLVED
I have a 1300w power supply. This had worked fine in the past. I am only using 800w. When I powered the rouge card with an additional power supply it began working fine. I also upgraded the bios but that had no effect. The problem has something to do with power but I am happy everything is back up and running now.
3 Likes
