I tried using 37.3 and only got about 80Mh.
I used 37.5 again, I think it was the best results I obtained.
GPU ZOTAC RTX 3060 OC TWIN EDGE 12GB
I was finally able to pull it off, I found out that at least one of the gpus must be connected to a monitor to achieve 120 MH Thanks.
It is really strange, I have 123+ without connecting to monitor.
And with powerlimit - 120
I’m using a slightly more agressive OC in Hive. and testing your settings. I like the power reduction. I’m going to monitor it for another 30 minutes and see if it’s worth the change. Cheers for the info!
Your wattage is really high, I would say bring it down to 120-125w, keeps the temps lower, longer lifespan, and you will hit 120 Mh anyway.
Driver 460.39
1 Like
getting 118mhs with zotac 3060. im on driver 460.39 nbminer 37.3
1600 absolute core
2600 mem
fan 70
110pl
temp 47
any suggestions? i tried offset core but got around the same mh and more consumption. cant reach 120++
Nbminer 37.5
1 Like
hi, i am mining ergo with 121.3 mh/s but after some hours de fan shows 0% on hiveos. Any suggestions for this not to happen?
Nbminer 37.3
Driver 460.39
Overlock: 200/2200
PL 110
Fan: 75%
RTX 3060 PNY (1 fan model)
1 Like
I have the same card model and I have your problem as well but seems it’s not affecting the mining, card still pushing same h/s and fan speed remain at 75%
Change the nvidia driver version to 460.39 and keep the same OC settings, it will fix the h/s 100%.
I have some problem with 3060 and nbminer…
It is makes me angry )
Driver version and miner?
Latest ones, 38.1 465.31
That settings not work for my cards…wtf they do…