RTX 3060 getting worse hashrate with overclocking when mining ERGO

Nvidia Cards
, , ,
1

I am running ~103 Mh/s when mining ergo at stock settings but I have seen a lot of people here getting 120 Mh/s without breaking a sweat with overclocking but as soon as I go over 200 Mhz on my memory clock my hashrate drops to half. Is there anything I am missing or can do to get close to 120 Mh/s to mine ERGO? Please help!

My settings as as follows:

  1. hive os v 0.6-203@210531
  2. graphics driver version: 460.67
  3. Fan: 65%, power: 65%, core clock: +0 or up to -200 (does not seem to make much diff)
  4. Motherboard: Z390 AORUS PRO WIFI
  5. Flight sheet: ERG with autolykos2 @ herominers pool, nbminer 37.5 or latest, I have tried 37.3 as well, same results.

Core clock: +0 Mhz, Memory clock: +0 Mhz, Fan: 65%, Power: 65%, getting ~103 Mhz

Core clock: +0 Mhz, Memory clock: +1000 Mhz (or anything more than +100), Fan: 65%, Power: 65%, getting ~55 Mh/s.

Here is an image for reference

Imgur

Any and all help is appreciated, thank you!

2

I can see two major problems here. One is the drivers. You need to use 460.39

Second, the Watts are really high. You need to bring them down to 115-125w max!

For settings try -502 core / 2600 mem / 115W

3

You sir are a legend! I tried -250 clock, 2300 Memory, 101 W and 460.39 and it works! Getting 120 on all card except one, it’s getting ~117 with the same settings, any idea how to fix that?

4

Nbminer
460.39
F 65
C 200
M 2600
P 110

125Mh

2 Likes
5

Thanks guys! I tried the settings and it worked, I could squeeze to 125 Mh/s with @eledush settings but mine are not stable so I will stick to 120 Mh/s for now.
The only issue I have now is that I am getting 116-117 Mh/s on my one card, any solutions to this?

[Album] 117 Mh/s on the last one
6

Mem 2400?

7

I did, but the last graphics card with the same settings is getting low hash rate. about 2-3 Mh/s.

8

image
image1205×95 16.3 KB

image
image1200×92 17.4 KB

Not sure if it will help but that’s what i can max it out to with RTX 30xx and RX 6700 xt and its stable.

9

woah, your overclocking is rad, thanks. I finally figured out the settings.

10

Friend, i have followed your settings but i can’t achieve your results. I even see that we have the same gpu. It seems that something is limiting me to 103 MH.

Something that you are doing wrong?

309
3091257×469 83.8 KB

11

PL 110
Mem 2600

12

It only increases my consumption and it remains at 103MH, I cannot go beyond that mining power. Do I need a specific version of NBMiner?

13

ERGO@NBMINER 37.3. Use this version of nbminer.
Settings:
PL:115-120w, see which one works for you
Cclock: -250
Mclock: 2200 to 2400 whichever is more stable for you, 2200 to 2400 will give you 120 to 123 MHs.
Fan speed: Depends on your temps, mine are 65%

14

I have tried these settings bro, but I do not go above 104MH, my temperature is at 57.

15

Then only one thing comes to my mind. You must have set dev fees to 0 or 1. Change that to 2% and see

16

Where do I change that option friend? The truth is that I am new to HiveOS.

17

share your flight sheet

18

I have it like this

fs
fs719×771 45 KB

19

Hi guys, I have rig with 5x3060
Try to use nbminer 37.6 (last version) on see hash - 120-121
If I use old version - 37.3 for example - hast rise to 123+

Why? oO

20

I don’t know why. but u will have use version 37.3 if u better result

1 Like