Hey guys, I am currently running a setup with three RTX 3060 for Ravencoin and I was wondering what OC settings do you use in order to achieve a good hash rate (24-26 Mh) that will also manage to keep the card up and running in the long run. My setup currently looks like this. I am using two MSI Ventus and one Gaming X Trio
Not a whole lot of people talking about the 3060 on here. I am about to pick my first one up. My 3060 ti (MSI gaming Z) runs 29.6 hash at 1375c, 2300m, 167pwr. Try inching up the core 100 at a time and then 50.
1 Like
When you get your 3060, can you share your results here. I will personally find it very useful, and perhaps a lot of other people as well.
Also, update of my rig, for the last 6 days i have been running these settings and had no problems what so ever. Last 2 days i changed core to 220 and fan speed to 75, which didn’t change the hashrate at all, and i will probably stick with it because of protecting my GPU’s in the long run. There are some errors for invalid shares occuring here and there, but that doesn’t seem to stop the rig from mining it’s shares for the day
I am totally new to ravencoin. It seems to me, core clock does not matter much.
PL affects hashrate the most. Put it on max pl, max memory clock, and you get the max result. Then you can dial down the PL for efficiency; dial down memory clock if invalid shares appear of rig unstable. My electricity is $0.10 a kwh. So I am not overly concerned about the efficiency.
This is a MSI, double fan
I have another ASUS, single fan, which has worse thermal performance than the double fan one. I have to lower the PL to avoid over heat
1 Like
Show us your worksheet please?
Hey guys. Update after nearly 40 days of non stop mining with these settings:
3x3060 rtx cards:
Fan 70/ Core 220/ Mem 2300/ PL 135
Settings look pretty stable, some invalid shares occurred from time to time but still no worries in regards to getting paid. With these settings from 3 cards i can reach a stable hashrate of 72 Mh/s and also hold the temp of my cards around 50C and lower.
I still haven’t made any settings on my flightsheet configs and I don’t know if i should, so if anyone can share information about decent flightsheet settings that would be super cool. Currently using t-rex miner on 2miners pool.
Zotac 3060 LHR
Fan 80/ Core 100/ MEM 2300/ PL 140 (getting 24.20 mh/s)
3x
GA106 [GeForce RTX 3060] 12050 MB · ASUS
Samsung GDDR6 · 94.06.14.40.B5 · PL 100 W, 170 W, 187 W
Settings : Fan 60 / Core 250 / Mem 2750 / PL 120
Watchdog Critical Temperature 69 / Target core temperature 65 / Target memory temperature 85
Temperature 62 - Fan Speed 55%-60% - Hashrate 22.9 on every card
Tenho usado C265 M3500 PL150 fazendo 25Mhs
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.