Hello, I just had a problem on my rig by adding a 5th graphics card. I have a 6600 XT and three 6600 that were running fine until now.
I wanted to add a second 6600 XT and⊠big problem.
GPU driver error, no temp or DEAD.
The card is recognized and starts correctly, it even went up to 15 Mh during one of my manipulations but the miner crashed right after.
The miner stops every time and impossible to send a command to the rig.
I tried everything, the beta version or the old versions of HiveOs. The different OC, the installation of the drivers, or the different commands:
I checked the riser and the cables that I even changed just in case but nothing to do.
I removed one of the 6600 to see if I could run two 6600XT and two 6600 to see if the problem comes from the new XT and indeed it does. Even with 4 cards the rig still restarting, so I unplugged it and put my three 6600s and my first 6600 XT .
I donât know why there is no problem with the first XT. Itâs when I put the second one in that the problems start!
So i was running into the same issue while using Phoenixminer. Tried multiple versions but didnt work. Ended up trying multiple miners and found lolminer version 1.37 seems to work. im only running 2 GPUs on this test rig. one is an old 390x and a powercolor RX 6600 non xt. the 6600 was showing the same exact issues you are describing until i made this change. hope this helps.
Fixed it by using different kernels. By default it use optimized kernel, so for 6600XT used 0, and 1 for another gpuâs.
Sorry about answering after 25 days, but it may help someone.
For 1st gpu RX6000 and 5 another ones that run without errors.
-clKernel 0,1,1,1,1,1
-clKernel Type of OpenCL kernel: 0 - generic, 1 - optimized, 2 - alternative, 3 - turbo (1 is the default)
Hey guys, all new to me. Having the same problem from day 1, which was 2 weeks ago. This is the most promising post Iâve seen, but I have no idea where to make that change. Where do I find âAdd it to âExtra config arguments:â.â
Hey guys, new / old issues. Rig was running fine for about 5 months. I shut it down to play around with cooling fans on the frame. While it was down, I decided to rearrange the cards - Nvidia, AMD together as apposed to mixed. Wouldnât start mining, but realized I hadnât changed the kernel order. Corrected that, but still no joy. Here are the screen shots i managed to get. HELP!!!
So if anyone ever seeâs this post, never mind. I put the card order back and everything works just fine. Only question now is, why didnât the flight sheet / miner extra config changes I tried to make to reflect the new positions of the cards not take? It would always revert to the original and therefore couldnât mine.
