I’ve recently installed HiveOS successfully, but am unable to access my BIOS after installation. The operating system has been setup and runs correctly with no issues. Selecting “System Setup” from the GNU Grub menu also leads to a blank screen with a blinking cursor on the top left hand corner of the screen.
I am trying to update the settings of my BIOS to be able to read more then 3 GPUs on my machine. Going through traditional means of accessing BIOS through the “F1” and “Del” keys is also not working. What are some steps I can take to regain access to my motherboards bios to make this change?
I just had this problem too. I got into the bios by removing the cmos battery, unplugging all risers from the pcie slots, plugging monitor hdmi into the motherboard (igpu). Not sure if all of those steps are necessary but it worked for me.
hi
remove all riser
remove hdd
then remove power ac cable
and the end remove motherboard battery for 1 minute
place battery again
start manboard and press f2
One time solution is to unplug risers and connect hdmi/dpi to mobo assuming you got an APU. Once you plug back the risers as you are done with bios you will not be able to go back to bios.
Long term solution is to change from PEG to IGD in settings → advanced → Integrated Graphics Configuration → Initiate Graphics Adapter → IGD
