I get 10 mh and I saw that it takes 15 mh 17 mh 19 mh in an average place. but I couldn’t go above 10 mh.
Try setting REF to 25-30
Thank you for your answer I tried but it’s still the same
You’ll probably need to modify the BIOS on the cards and copy the straps from a lower memory speed to the higher ones.
After further research in a different thread, it seems that you’re stuck at 10-11 MH/s unless you use lolminer and connect each GPU to a x4 or higher slot.
If you have each card on a x1 slot you’ll get about 10-11MH/s
If you have each card on an x8/x16 slot, you should see about 20-25MH/s
This topic was automatically closed 416 days after the last reply. New replies are no longer allowed.