Could someone provide me with a correct overclock so I can improve the performance of Zotac 1660 TI AMP Micron on HiveOS?
Hi,
Core at 900 and mem at 2000… for me very stable at 31.03 mh/s with temp at 54 c…
2 Likes
Thanks for the info. I just tested it on a plate and the result was positive. Which Mining Pool do you recommend to me? I currently use the t-rex. Can I get a better result with NBminer?
1 Like
Hive os pool… very steady for me… Trex miner is better then others for nvidia…
1 Like
Only two cards accepted the overclocking recommended by you, when I apply to other GPUs the rig locks and all worker information disappears. Is there anything related to BIOS? Could you provide me with any more information? Thank you very much in advance!
Make some change in motherboard bios…
disable VT-d etc.
Csm disable
4G encoding is enabled
disabled unused devices like HD audio
Put Pcie at Gen 1 and check then at Gen 2 ,not auto…
Make bios update to latest version…
I think the problem is to the lines of motherboard…
Make the changes one by one until you find the problem!!!
Thanks again. I will follow with these procedures.
I will perform the procedures mentioned by our nanial colleague today.
Sir do add one more PSU. You just have 750w. Add one more 550w or 650w. Run only 4-5 cards on this Card. I would suggest to run 4 cards on this and rest cards on other PSU
2 Likes
I am having a similar issue with my Zotac GTX 1660 Ti; I can run 4 of them but when I jumped from 4 to 5 or to 6, I received the “NVIDIA OC failed” and the information for 1 or 2 GPUs disappear.
I have a 1600W ps and a 1000W psu attached to motherboard Biostar TB360-BTC Pro 2.0.
in Bios I have:
4G Decoding enabled
CSM support disabled
above 4GB MMIA Bios Assignment enabled
primary display PEG
PCIE Gen2
Any help would be greatly appreciated.
=== GPU 0, 01:00.0 GeForce GTX 1660 Ti 5944 MB, PL: 70 W, 120 W, 132 W === 10:31:44
SET GPU CLOCKS: 0 MHz
SET POWER LIMIT: 75.0 W
Max Perf mode: 4 (auto)
Attribute ‘GPUPowerMizerMode’ (Rig_1:0[gpu:0]) assigned value 1.
Attribute ‘GPUFanControlState’ (Rig_1:0[gpu:0]) assigned value 0.
Attribute ‘GPUGraphicsClockOffset’ (Rig_1:0[gpu:0]) assigned value -200.
Attribute ‘GPUMemoryTransferRateOffset’ (Rig_1:0[gpu:0]) assigned value
2200.
=== GPU 1, 02:00.0 GeForce GTX 1660 Ti 5944 MB, PL: 70 W, 120 W, 132 W === 10:31:45
SET GPU CLOCKS: 0 MHz
SET POWER LIMIT: 75.0 W [Unknown Error]
(exitcode=123)
Max Perf mode: 4 (auto)
ERROR: Error assigning value -200 to attribute ‘GPUGraphicsClockOffset’
(Rig_1:0[gpu:1]) as specified in assignment
‘[gpu:1]/GPUGraphicsClockOffset[4]=-200’ (Unknown Error).
ERROR: Error assigning value 2200 to attribute
‘GPUMemoryTransferRateOffset’ (Rig_1:0[gpu:1]) as specified in
assignment ‘[gpu:1]/GPUMemoryTransferRateOffset[4]=2200’ (Unknown
Error).
Attribute ‘GPUPowerMizerMode’ (Rig_1:0[gpu:1]) assigned value 1.
Attribute ‘GPUFanControlState’ (Rig_1:0[gpu:1]) assigned value 0.
(exitcode=100)
=== GPU 2, 04:00.0 GeForce GTX 1660 Ti 5944 MB, PL: 70 W, 120 W, 132 W === 10:31:45
SET GPU CLOCKS: 0 MHz
SET POWER LIMIT: 75.0 W
Max Perf mode: 4 (auto)
Attribute ‘GPUPowerMizerMode’ (Rig_1:0[gpu:2]) assigned value 1.
Attribute ‘GPUFanControlState’ (Rig_1:0[gpu:2]) assigned value 0.
Attribute ‘GPUGraphicsClockOffset’ (Rig_1:0[gpu:2]) assigned value -200.
Attribute ‘GPUMemoryTransferRateOffset’ (Rig_1:0[gpu:2]) assigned value
2200.
=== GPU 3, 05:00.0 GeForce GTX 1660 Ti 5944 MB, PL: 70 W, 120 W, 132 W === 10:31:45
SET GPU CLOCKS: 0 MHz
SET POWER LIMIT: 75.0 W
Max Perf mode: 4 (auto)
Attribute ‘GPUPowerMizerMode’ (Rig_1:0[gpu:3]) assigned value 1.
Attribute ‘GPUFanControlState’ (Rig_1:0[gpu:3]) assigned value 0.
Attribute ‘GPUGraphicsClockOffset’ (Rig_1:0[gpu:3]) assigned value -200.
Attribute ‘GPUMemoryTransferRateOffset’ (Rig_1:0[gpu:3]) assigned value
2200.
=== GPU 4, 06:00.0 GeForce GTX 1660 Ti 5944 MB, PL: 70 W, 120 W, 132 W === 10:31:46
SET GPU CLOCKS: 0 MHz
SET POWER LIMIT: 75.0 W
Max Perf mode: 4 (auto)
Attribute ‘GPUPowerMizerMode’ (Rig_1:0[gpu:4]) assigned value 1.
Attribute ‘GPUFanControlState’ (Rig_1:0[gpu:4]) assigned value 0.
Attribute ‘GPUGraphicsClockOffset’ (Rig_1:0[gpu:4]) assigned value -200.
Attribute ‘GPUMemoryTransferRateOffset’ (Rig_1:0[gpu:4]) assigned value
2200.
=== GPU 5, 07:00.0 GeForce GTX 1660 Ti 5944 MB, PL: 70 W, 120 W, 132 W === 10:31:46
SET GPU CLOCKS: 0 MHz
SET POWER LIMIT: 75.0 W
Max Perf mode: 4 (auto)
Attribute ‘GPUPowerMizerMode’ (Rig_1:0[gpu:5]) assigned value 1.
Attribute ‘GPUFanControlState’ (Rig_1:0[gpu:5]) assigned value 0.
Attribute ‘GPUGraphicsClockOffset’ (Rig_1:0[gpu:5]) assigned value -200.
Attribute ‘GPUMemoryTransferRateOffset’ (Rig_1:0[gpu:5]) assigned value
2200.
1 Like
Hi,
Version of Hive os (kernel) and client (driver ?)
I think your problem is GPU1 … What is your connection to that card? (6 pin on riser ? )
What is your PSU (model ,wattage )…
Hi Nanial -
I am running Hive OS 0.6-208@210818
Nvidia driver 470.74
GPU1 is connected via a 6-pin riser card
Main psu: EVGA Supernova 1600 G2
PSU 2, which is only connected to motherboard right now is EVGA Supernova 1000 G+
Thanks for all your help.
Upload foto with OC settings …
Hi Nanial -
I have 4 cards running now as I have trouble going over that many cards but here is the OC settings that I have for the 4 cards running now. This is typical settings I had on the other 2.
I will install the other 2 cards and send a picture as well.
Put a new picture with cards ( i need to see what type of mems you have)
