I didnt try hkuve2 solution, Im running my rig on HiveOS… he managed to solve it in Windows.
I tried to lower power to 124W but HiveOs wont let me because lower limit for my card is 125W.
The wierd thing is that after OC my card running @ 94W, no matter power limit is set to 125W.
I see that luka and daniyalkza have simmillar situation @108W, 102W…
I decided to give it a try with that BIOS. Maybee this weeekend… hoping that it will help. Like I said before, the main concern is different number of ports on those cards so Im prepared to worst case scenario to brick the card… so I need enough time if that happens I can try to unbrick it.
Guys, I tried again so many differents overclocks settings on HiveOS GUI (the image show just some of my tests). What I can notice from these tests is the behavior of the core clock.
The Core Clock follows the settings what I set on Hiveos GUI until some point. Over that, no matter how I increse the settings, nothing change. For example: I was changing core clock from 0 to -500 and my frequency core clock results was going up until ~870MH/z. If I try to increase GUI setting beyound that (like -600 or -700), nothing changes, with the core staying at ~870MH/z. Imput a absolute core clock in GUI (like 1080) on this card seems not work either.
I’m using T-REX Miner. Maybe another miner could work. But I couldn’t try yet.
Just some more information here maybe help someone to understand better and finally solve this issue.
@Churta, how do you get 40.9MH/S? What kind of procedure did you do? Please, I’m very desperate to get some more hashrate on this card. For me, just setting your overclocks values wont help.
Nothing special. It took me some time to find sweet spot. I increased core and mem in steps of 10 untill it starts to drop MH. Then I lowered it back and thats it.
Guys, the issue persist on HiveOS for specifc bios version in some 2060 super cards. Maybe I could solve my problem if I try what @hkuve2 did on windowns, but I really want to keep working on HiveOs.
@meteorpalu probably soon you will blowup your card using mem clock like that.
So, again: has anyone managed to solve this problem on HiveoS using specific bios version of 2060 super which can’t reach 40MH/S?
@daniyalkza, you which have 4 cards with this problem, did you find any solution?
Yeah, need help with setting it up in HiveOS. In Hive, with same overclocks as I did in windows to achieve 40+ doesn’t work and the watts consumed is still low (around ~112). Can’t we do core clock curve editing in Hive or like save our windows overclock settings to the bios itself?
Hello, im newbie on mining. I have a this GPUGeForce RTX 2060 SUPER Dual 8GB GDDR6 (NE6206S018P2-1160A) and i have low h/ratę 36 on OC. Any solutions for this GPU?. My power limit its 100%
Actually i tried, inno 3d bios, because i have inno 3d card… I think the problem is my memory overclocks better when temps are low…and reduce its performance when temps are high…my card temps are 49-50…but may be memory are becoming hot…
Because heat sink is placed only on g
pu chip not on memory ( see image)
No, it’s not temp … It happens only on all algos similar to ethash. All other algos on this GPUs works fine.
Basically, it’s caused because on ethash algo GFX Core clocks too low to give you 40+ MH/s (725-900 MHz)
