FAN 50
CORE 1430
VDD 775
MEM 950 950 900 940 950 950
MVDD 1350
VDDCI 775
Running RX 5700 XT for 16 hours without any problem. 'm getting 352.5 MH/s with modded bios.
I have some questions for these NAVI GPUs.
FAN, CORE and MEM are the values we used to. VDD defines Core Voltage. No problem.
MVDD and VDDCI ??? Which one is for new Navi GPUS ?
You can set MEMORY to 950 maximum on HiveOS. You can see and edit this information on MPT. You can get unstable system if you set higher values on MPT. You can see i had to use lower values than 950 for MEM 'cause the GPU fails if i set it higher. You have to check and find the stable MEMORY. Afteer you have found the stable mem for your GPU, you can use lower voltages.
I dont use Windows for mining, so i cannot tell anything about it.
Gigabyte is different brand from Sapphire. So, each manufacterer has different systems, OC, powerplay table. You have to play and find the stable and best performance settings with low voltage.
You have to edit the Bios of the GPU. But it s dangerous if u dont know what u re doing.
About OC & UV:
-Set 800mV for core and memory.
-Set 1400 CORE Clock.
-Set 900 MEMORY Clock.
-Run the system around 15 hours. If the rig is stable then increae 10 memory clock.
You can find sweet spot by increasing 10. When you get error, Go back 5, if you get error again go back 5. Then stop there. After you find the sweet spot for mem, you can try to lower voltage.
I have bought 12 pcs Sapphire Nitro+ RX 5700 XT with Samsung Memory today. Although i made custom bios, i cannot set higher than 900-905-910 MEMORY. I’m getting error messages. I know Micron is worse than Samsung about MEMORY. But i think it s different on RX 5700 XT GPUs. I m really get awesome hashrate on Micron Memory.But something is wrong on Samsıung Memory.
Yeah, I was under the impression that the Samsung memory is supposed to be “better” but I have the same results as you. All my powercolor cards with Micron memory clock around 930-950 but I cannot get a stable clock above 915 with my only Samsung card.
I have tried several different timings by changing the vbios straps as well as playing around with Vddc mvvd and vddci but cannot get any better results.